IX otf and ttf fonts

​23.11.2022
IX developer 2.40Sp7

X2 terminals (actually windows CE \ wec2013 ), do not support the newer OTF font standard ( OpenType Font) . Only TTF ( true type font) are supported for terminal targets, however on a PC RT ( Run Time ) you can use OTF. 

It is possible to convert a OFT font to TTF: https://cloudconvert.com/otf-to-ttf

iX Developer SP7 - 2.47.473 Release information

• iX240SP7 LastMinuteNotes iX PIEN341L.pdf.pdf
• iX240SP7 ReleaseNotes iX PIEN340Q.pdf.pdf

Driver MODICON Modbus Slave: Command XDNCW

Windows CE versions, X2, iX, E1000

• WindowsCE_X2_iX_E1000_.xlsx

Creating a custom Welcome Screen \ startup screen on a X2 pro operator panel

​27.05.2020
X2 series

Place the desired splash picture in the projects "project files" folder.
The picture must be a .bmp file, with the exact screen size as the terminal.
FIlename:  iXCustomSplash.bmp

After the download of the project, this picture will be used as splash screen .

Google Gmail end suport for " less secure apps " ends may 30 2022

​05.04.2022

From 30'th of may 2022 gmail accounts no longer support "less secure apps".
This means that  the IX / X2 terminals email client no longer can use the gmail servers.  Switching to another major isp, such as AOL etc, probably will have a limited effect, since this probably will be implemented broadly on all major ISP's in the near future.

Beijer have no intentions to implement a secure email client on the current platform.  

So the only way to use the current email client will be to use either an internal / local / private emailserver or relay software, requiering a local computer. or a subscription on some service that accepts less secure apps.  

For the time being (April 2022), smtp.mail.yahoo.com is claimed to work. 

To allow "less secure apps in Yahoo", Log in to Yahoo mailbox and go to Account Info page. Choose Account Security, and turn on the button of "Allow apps that use less secure sign in". See This for details

iX - SMTP - Using Gmail servers using App password

​​​Google has dropped the support for "less secure apps" and no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.

From now on an "App Password" is required when sending emails from iX panels that are configured to use Gmail's SMTP servers. Please notice that 2 step verification is required in order to create an app password. 

Create and use App Password

1. Login to you Google account.
   
2. Make sure 2-Step Verification is enabled.
   
   
3. Generate an App password. Select "Mail" as app and for device select "Other" and enter a custom name. Click Generate to get an app password.
   
   
4. Then use the following settings for the email device in the iX application
   
   From Email Address: [Gmail address]
   SMTP Server: smtp.gmail.com
   Port: 587
   Encryption Mode: ExplicitSSL
   Authentication Mode: AuthLogin
   Username: [Gmail address]
   Password: [The App Password]
   
   
   

• Set gmail App password .pdf

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

When are Data deleted from the ix x2 database / backup restore database

OPC ua settings in Phoenix plxnext engineer

​04 october 2022
To use IX OPC client with Phoenix PLC's some settings are needed in the PLxnext engineering tool, and also the PLC Webserver:

Basic settings "Visibility of variables" = "Marked"

Subject1 = HMI ip adress
UNcheck "Use the thruststore for client authentication" AND " Check application URI against client certificate. 

To get the NS ( namespace ) settings in IX developer correctly, the easiest way is to browse the Phoenix server from IX developer, by clicking the small down arrow at the right side of the "ADD" button in Tags, and select "Add tags from OPC server" . Then the nemespaces are set automaticly. Otherwise you can see them in the screenshot below:
 

WEB Server:
Disable Autentication in WBM in the PLC 
Login with "admin" and the password on the plc lable

• phoenix_OPCUA.docx

Image Sticking

When utilizing TFT LCD HMI panels in applications where a fixed or partially fixed image remains displayed on the screen for extended periods of time, users may experience a phenomenon referred to by the LCD industry as Image Sticking. Image Sticking - sometimes also called "image retention" or "ghosting"- is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed.

Image sticking can be caused by:

• Static images
  
• No Screensaver
  
• Sharp contrast transition (e.g. black / white)
• High ambient temperatures
  

• Use the screensaver functionality.
  
• Changing constantly  between static and dynamic images
• Avoid excessive brightness differences between foreground and background elements
• Use colors with similar brightness
• Use complementary colors in follow-up images
  

Best Practice Database on SD card or flash memory

​This document provides recommendations for how to setup and use the X2 HMI panel in the best way to reduce unnecessary wear on the flash memory.

For more information: Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF

• MAEN360.pdf

Driver Allen Bradley DF1: Behövs 1747-KE kommunikationsmodul ?

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

​30.01.2023
X2 series 

This Document describe how to enter the service menu, go to settings in the diagnostics part, and supress the flash wear warning message.

• SUEN00411 Suppress FlashWear warning .pdf

Max number of recipe items / tags

iX developer 2.40 SP7

The help file states that maximum 256 recipe items can be used. This is wrong, maximum number of recipe items / tags / columns is 998. 
When attemting to add more, iX will display a popup with an error message.

Convert from Exter/E1000 To X2 Series

The Mitsubishi E-Series hardware products and E-Designer software have been manufactured by Beijer Electronics for Mitsibishi for many years. In 2015, this partnership ended. Beijer-branded E1000 HMIs are now orderable directly through Beijer or one of its authorizated distributors. As your Mitsubishi terminals need to be replaced, Beijer provides a smooth transition by offering three paths:

Direct Replacement Path (E1000 panels) - A direct hardware and software replacement for most E1000 panels. The Beijer-branded E1000 panels are identical to the Mitsubishi-branded E1000 panels, only the rear labeling is different.

Direct Replacement Path (EXTER panels) - A direct mechanical drop-in hardware replacement is available for most E1000 products. The replacement products use your existing E-Designer applications after a simple project conversion to Information Designersoftware, a service offered by Beijer Technical Support

Upgrade Replacement Path (X2 panels) - Enhance your future HMI offering with modern X2 hardware and state-of-the-art iX Developer software including graphics, scripting, alarms, recipes, remote access and multiple communication drivers. iX Developer supports and integrated E-Designer to iX Developer project conversion feature (as well as Information Designer to iX Developer).

The following is a comparison chart of the older, discontinued E-series/CIMREX HMI panels to the current E1000/EXTER HMI panels, as well as the closest versions to Beijer''s latest X2 panels.

1 The Beijer-built E-series models were branded for Mitsubishi. The CIMREX models were the Beijer-branded versions of the early E-series models. All were discontinued a number of years ago.

2 The E1000 models are upgrades from the older, discontinued E-series models. Historically, the Beijer-built E1000 models were branded for Mitsubishi, but now carry a Beijer brand. The E1000 are now only available from Beijer or an authorized distributor; they are no longer available from Mitsubishi. E1000 programming is based on E-Designer software which can now only be obtained from Beijer.

3 The Beijer-built and branded EXTER models are virtually identical to the E1000 models. EXTER programming is based on Information Designer software. Beijer Technical Support can convert an E-Designer program to an Information Designer program, if required.

4 X2 models are not 100% replacement models for the E1000 or EXTER models. They have different form-factors; there are no X2 Keypad models; all X2 models have color displays. These X2 models are the closest versions to the E1000/EXTER panels. X2 pro models have more memory and faster processors than the X2 base units. iX Developer can import an E-Designer or Information Designer project to run on X2 models, though it may not import 100% of the functionality.

5 Adapter plates enable a smaller footprint EXTER or E1000 HMI to fit in the space occupied by a slightly larger, discontinued Exxx or CIMREX model. Note: Adapter Plates allow most E1000/EXTER models to fit the cut-outs used by the discontinued E-series/CIMREX models.

6 X2 series are Beijer main iX models. See the EOL Notifications for details.

X2 BatteryCheck

28.05.2024
X2 \ IX 2.50

There is a feature in the BeHwApi that gives the status of the battery. Specially convenient for Box2 since they have no screen. 
This feature was implementet aprox. from b906 of the firmware so an update can be needed if implementing in older terminals.

Sample code for a tagscript that use the SystemTagMinutes to set\reset a global tag according to the battery status:  (see also attached X2 Control 10 project)

• BatteryCheck_X2.zip

X2 Preemptive maintenance

29.10.2020
IX \ x2 terminals 

This message: 
" ​The unit should be scheduled for preemptive maintenance service "
appears on the screen after reboot.

This is a feature implemented in Firmware version 8.0 b569.
It promts that the display or flashmemory is soon to be due (liftime reached)

From Release notes one can read::
Added support of Product health and Service time internal when eMMC flash memory and Backlight reaching end of lifetime.
Presented in Diagnostic Page and in a warning Message:
“The unit should be scheduled for preemptive maintenance service”

If one press ok, the message is gone until new reboot.

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

Some versions of the system program to X2 require the EBOOT to be updated as well. The EBOOT is included when you create "Recovery SD" from the Image Loader. Please note that the SD card must be formatted to FAT16/FAT32 otherwise the EBOOT will not be updated even though the "Make Recovery SD Card" setting was enabled.
The file system exFAT is not supported when upgrading the EBOOT.

The EBOOT version can be verified in the diagnostics which can be opened from the service menu.

X2 pro (SC) / X2 marine (SC) / X2 extreme (SC) / BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Battery replacement

17.oct.2018

General
X2 series operator terminals use Lithium batterys to  retain RTC data(Real Time Clock), and Persistent variables (battery backed variables), in terminals with onboard codesys PLC (control \ motion versions) (stored in SRAM)

PS Imortant:
When replacing the battery the SRAM storing the Codesys persisten variable will be wiped. To avoid loosing the settings, one need to use either the recipe feature in BCs tools \ codesys, or use the IX Recipe feature, to backup the data prior to battery replacement. The ix metode has the benefit that it can be handled without a computer. (althoug it needs to be pre-implemented in the IX project)

X2 Base: 
use a rechargable Lithium ion 200mA cell. (on print soldered)
Normaly not to be replaced. (need 48h to fully charge on startup)

X2 Extreme:
X2 extreme 7 & ( 12 V)  
BR2330A/GAN 3V 255mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

All other extreme terminals use:
BR2477A/GAN 3V 1000mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

​X2 Pro/Marine/control/ Motion:
BR2032 3V 200mAh Button Cell, non rechargable battery. User Replacable.
(remove backcover by unscrew the 4  torq screws ( T10) in each corner)

Lifetime:
The RTC current consumption is 3uA when power is off 
The SRAM current consumption is 1-2uA when power is off 

Lifetime depends on both temperature, and how much of the time the terminal is powered. 

A Standard X2 terminal with no SRAM (only RTC), charging 3uA when power is off should then last 200 000uAh : (3uA*24*365) = 7,6 years. (if never powered) (worst case is estimated to be = 5Years)

A Control terminal with SRAM the calculation would be: 
200 000uAh : (5uA*24*365) = 4,6 years. (if never powered) 

A standard terminal used 260 days\year 10h\day would last aprox 11 years.
200 000 : ((260days * 14hurs * 3uA) + (105days * 24hours * 3uA))

Warning:
When the Battery is due for replacement, a system warning dialogue will appear in the middle of the screen. This dialogue must be acknowledged to make it disapear. After a reboot the warning will occure again if the low battery condition remains.  


Some Details on lithium batterys
BR2032 brakes up to:
B - Positive electrode material (Carbon Monofluoride)
R - Round (shape)
20 - Diameter in mm
32 - Height in 1\10 mm = 3,2 mm

BR2032 vs CR2032:
Due to the differens in positive electrode material, BR cells self discharge slower than CR cells, (thus has longer "shelf time" (90% after 10 years)),  And has wider temp. range than CR  (-30 to +85 vs -20 to 70).
The voltage is tough the same (3V), and apart from the temp. spec. theese cells are compatible.

General handling of positions with Beijer servo products

Basic description of how to setup a servo application to handle the movement requirements, based on the BSD template projects for BoX2 pro motion and X2 control.​

• 190723 General handling of positions with Beijer servo products.pdf

Beijer Electronics - Device Runtime and Compiler versions in CODESYS

Attached documents describes following;

• What versions of project compiler and runtime you should use when programming our codesys related products.

- TxA SoftControl
- TxB SoftControl
- TxB SoftMotion
- "PIO" Programmable I/O
- X2 Control

• What versions of communication drivers you should use in Codesys when communicating out from our Codesys related products, based on what CODESYS runtime currently installed in the device.

- Serial Modbus RTU
- Ethernet Modbus TCP
- EtherCAT

• Codesys communication driver versions_20181129.pdf
• Codesys Runtime and compiler versions_20181129.pdf

X2 control/BoX2 pro SC - CODESYS OPC UA server using encryption

​With the current* image/CODESYS release for X2 control/BoX2 pro SC then encyption feature is not supported. Only anonymous connections can be used.

*  
Image 2.1.1 b906 
CODESYS runtime 3.5.13.30_12

CODESYS - Modbus RTU Dynamic Configuration

To have a dynamic configuration of Modbus RTU requires complete handling by code using IoDrvModbus.

From CODESYS FAQ:
https://faq.codesys.com/display/CDSFAQ/Modbus+RTU%3A+Dynamic+Configuration

Attached is a program example tested on X2 control 4 (3.5.10.10) together with Crevis slave (RS485).

ModbusRequest2
SysComOpen2

• DynamicSlave.projectarchive

X2 Codesys OPC UA prefix / Namespace settings

​08.07.2024
X2 Control b1103
Codesys runtime 3.5.18.60_15 

Prefixes \ Namespace settings for the Codesy OPCUA server are:

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

Observations regarding X2 control and OPC UA vs. ARTI communication

Handling of software limits - SoftMotion vs SoftControl

​Basic description of how to use software limits with the BSD template projects for BoX2 pro motion and X2 control.

• 190718 Software limits - SoftMotion vs SoftControl.pdf

Handling of modulo positioning - SoftMotion vs SoftControl

​Basic description of how to use modulo positioning with the BSD template projects for BoX2 pro motion and X2 control.

• 190718 Modulo positioning - SoftMotion vs SoftControl.pdf

Disable user management ( user password) in codesys device

​

To delete the user management of the controller after any unintentional activation, proceed as follows:

                         https://help.codesys.com/webapp/_cds_sec_faq_deactivating_usermanagement;product=codesys;version=3.5.14.0

Codesys - Enable/Disable Modbus RTU slaves from IEC code

Tested in Codesys 3.5 SP10 patch1 with X2 Control

​To enable/disable Modbus RTU slaves from IEC code the following option has to be checked.

Once enabled the instance name of the slave with the property .Enable can be used to control the communication to the slave.

X2 control/pro CAN bus limitations (HW rev. 1)

​For utilization of CANopen or FreeCAN on X2 control, we recommend not to operate above 500 kBit/s, on point-to-point connections. For CAN bus network connections, with mutliple nodes, it is recommended to not run above 125 kBit/s.

In the current hardware revision, rev. 1, of X2 pro/control, the input filter on the COM connector has a high load capacitance. This may impact on termination, reflections and bit times, especially at high bit rates.

The high load capacitance will be corrected in hardware revision 2.

X2 control / X2 extreme SC / X2 marine SC / BoX2 pro SC / BoX2 extreme SC, firmware / systemprogram vs Codesys runtime version

10.03.2022
List of X2 firmware vs codesys runtime compiler etc.
Copied from this eminent document: SUEN00392D recommendations and limitations

Copy Debug log to accessible folder

• CopyDebugLog.zip

X2 Date time picker script

​02.02.2023
X2 series.

This sample project let the user select a date and time from a calendar type of object and stores\presents the selected date/time in various formats in Global tags.

• X2_DateTimepicker.zip

Add Tags to Tagmonitor by script

​25.03.2019
IX dev. 2.40SP1
X2 control 10 (Should work on all platforms)

Attached sample project adds predefined tags to the TagMonitor object, making it easy to switch between  several different sets of tags in the list

• TagMonitor.zip

IX alarm info request lookup in pdf by page index

​31.08.2021
IX developer 2.40 SP6
Demo driver

Consept:
This sample project uses An alarms uniq ID to produce an index.
This index is used to show aditional info from a PDF document, regarding the selected alarm, when the user click the Info button. 

 Details:
The Main script is in the alarmserver, and fires with the "AlarmServer_AlarmEventInfoRequested" event.

The index is made from the  the alarm name column (first column in the alarm configurator that normally has no function for us ), which has default values: AlarmItem0, AlarmItem1 etc. 

The script extract the number part 0,1,2 etc to a global tag, to be used as a page index in the PDF viewer object.  Finally the Popup screen is opened.

In the popup screen The Pdf is opened, using the Alarm Taxt as Title,  and the page corresponding to the index is shown.

PS.
If several alarm groups are in use, Each group will default start with the name AlarmItem0. This will make duplicates. So in this case you must manually verify that the number part in the names are uniq, and consistent.   

• AlarmInfoIndexing.zip

Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.

This is to be found in Smart Engineering, SER0050. Either download the manual further down for SER0050 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-H3 and BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

​​

• SER0050_QS_ iX to BFI-H3-P2 ModBusTCP_V1.0.0-EN.pdf

Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.

This is to be found in Smart Engineering, SER0051. Either download the manual further down for SER0051 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3, BFI-H3 or BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
  
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0051_QS_ iX to BFI ModBusRTU_V1.0.0-EN.pdf

IX X2 Backlight \ screensaver ON Event

​14.04.2020
Attached project (X2 Control 10) , Have a scriptmodul that Counts up Tag1 each time the backlight goes from OFF to ON

• BacklightStatus.zip

Program example iX Developer: Modbus TCP communication between any X2 HMI and BFI-E3.

This is to be found in Smart Engineering, SER0060. Either download the manual further down for SER0060 or the complete Smart Enginnering here.

Example shows how X2 Base7 control/monitor up to 63 BFI-E3 in a Modbus TCT network. Functions supported are: 

Program example support:

• Works only towards BFI Frequency inverter BFI-E3-MTP 
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
  
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0060_QS_X2 to BFI-E3 ModBusTCP_V1.0.0-EN.pdf

iX Templates for E-key and X-Key

Templates for E-key and X-key, created as popups.

Unzip the *.zip file in < C:\Users\Public\Documents\Beijer Electronics AB\iX Developer 2.40 SP4\Screen Templates > and the templates will be available under “Add Screen”>Templates

Connect an action to the buttons, LED-colourfärg/Led-blink as dynamic if used.

• E_key_popup_X2Pro12.zip
• X_key_popup_X2Pro12.zip

X2 update time from Unix timestamp

​24.04.2023
IX 2.40 SP7 \ made for X2 control10

Sample project that reads the system time, convert to unix timestamp format (sec. since 1.1.1970), an store in a global tag.

Then a reverse methode, that takes this global tag and, convert it to time format, and  update the system time  on the terminal. :)

• Unixtimestamptest.zip

Quick start guide - Connect X2 HMI with Nexto PLC, SUEN00414

• Connect X2 with Nexto SUEN00414.pdf

Ping from IX x2 terminal

​27.02.02
IX dev. 2.40 SP4

The attached project sample (X2 control 10), Pings a fixt IP adress every 30 sec, and set\rst a global tag accordingly, to show the status of the connection.
All code is in a scriptmodule, initiated by the "created" event.

The actual Ping syntax is: (returns true\false)
if(Core.Api.Service.ServiceContainerCF.GetService<Neo.ApplicationFramework.Interfaces.INetworkService>().Ping("10.0.0.1", 100))

• Ping.zip

iX Developer - Top10 Alarm list, based on count and/or duration

​​You easily implement a Top10 Alarm list in iX.

1. Add a DatabaseViewer control to a screen

2. Add the following script to the screen:

void AlarmScreen_Opened(System.Object sender, System.EventArgs e)
{
DatabaseViewer1.IsControlVisible = false; //Optional, to hide manual controls
}

void btnTop10_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY COUNT(*) DESC,[Duration (s)] DESC","Database.db");
}

void btnTop10Duration_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY [Duration (s)] DESC, COUNT(*) DESC","Database.db");
}

• Top10_Alarms.zip

G Series, GT-5112 Program example X2 Control and GN-9386

Codesys 3.5 SP10 P1 

Note!
The program example also works against GT-5102.

• G-Series GT-5112 FromManual Special Modules Rev. 1.02.pdf
• X2_GN9386_GT5112_SP10_P1_20190315.pdf
• X2_GN9386_GT5112_SP10_P1_20190315.projectarchive

G series, GT-5112 Program example X2 Control and GN-9289

​Codesys 3.5 SP10 P1

Note!
The program example also works against GT-5102.

• G-Series GT-5112 FromManual Special Modules Rev. 1.02.pdf
• X2_GN9289_GT5112_SP10_P1_20190318.pdf
• X2_GN9289_GT5112_SP10_P1_20190318.projectarchive

G Series, GT-5112 Program example X2 Control and GN-9273

​Codesys 3.5 SP10 P1

Note!
The program example also works against GT-5102.

• G-Series GT-5112 FromManual Special Modules Rev. 1.02.pdf
• X2_GN9273_GT5112_SP10_P1_20190318.pdf
• X2_GN9273_GT5112_SP10_P1_20190318.projectarchive

G series, X2 Control, Parameter Set of I/O Modules connected to GN-9289 or GN-9273

​G-Series, How to configure I/O-modules with more then 2 bytes parameter area.
- Example, X2 Control to GN-9289 (Modbus TCP) with 5 pcs GT-3704.
- Example, X2 Control to GN-9273 (Modbus RTU) with 5 pcs GT-3704.

• X2_GN9273_GT3704_ParamSet_35sp11p3_20190403.projectarchive
• X2_GN9273_ParameterSet_35SP11P3_20190403.pdf
• X2_GN9289_GT3704_ParamSet_35sp11p3_20190403.projectarchive
• X2_GN9289_ParameterSet_35SP11P3_20190403.pdf

G series, X2 Control, Example with GN-9386 (EtherCAT)

Example 1:
Software: Codesys 3.5 SP13 Patch3
X2 control connected to 2 slaves GN-9386 with GT-1238 and GT-2328.
"X2_GN9386_2Slave_35SP13P3_20191025"

Example 2: 
Software: Codesys 3.5 SP13 Patch3
X2 control connected to GN-9386 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.
"X2_GN9386_Param_35SP13P3_20191025"

Example 3: 
Software: WARP 1.14 b1371, Codesys 3.5 SP10 P1
X2 control connected to GN-9386 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.

Note!

• I/O modules parameters must be set in Codesys! 
• The parameter are set to default (erased in this case) when "Generate" in WARP!
  Please use the "CODESYS_Project1.projectarchive" to check the setting.
• In next version of WARP the parameter setting will be supported.
  

The zip file "X2_GN9386_Param_Warp_20190516_.zip" contains:
- Backup of WARP project "X2_GN9386_Param_Warp_20190516_.WARPArchive"
- Backup of Codesys project "CODESYS_Project1.projectarchive"

• X2_GN9386_2Slave_35SP13P3_20191025.projectarchive
• X2_GN9386_Param_35SP13P3_20191025.projectarchive
• X2_GN9386_Param_Warp_20190516_.zip

G series, X2 Control, Example with GN-9289

​Example 1: 
Software: Codesys 3.5 SP13 Patch3
X2 control connected to 2 slaves GN-9289 with GT-1238 and GT-2328.
"X2_GN9289_2Slave_35SP13P3_20191025"

Example 2: 
Software: Codesys 3.5 SP13 Patch3
X2 control connected to GN-9289 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.
"X2_GN9289_Param_35SP13P3_20191025"

Example 3: 
Software: WARP 1.14 b1371, Codesys 3.5 SP10 P1
X2 control connected to GN-9289 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.

The zip file "X2_GN9289_Param_Warp_20190516_.zip" contains:
- Backup of WARP project "X2_GN9289_Param_Warp_20190516_.WARPArchive"
- Backup of Codesys project "CODESYS_Project1.projectarchive"

Tip!
G series, X2 Control, Parameter Set of I/O Modules connected to GN-9289 or GN-9273

• X2_GN9289_2Slave_35SP13P3_20191025.projectarchive
• X2_GN9289_Param_35SP13P3_20191025.projectarchive
• X2_GN9289_Param_Warp_20190516_.zip

G series, X2 Control, Example with GN-9273

Example 1:
Software: Codesys 3.5 SP13 Patch3
X2 control connected to 2 slaves GN-9273 with GT-1238 and GT-2328.
"X2_GN9273_2Slave_35SP13P3_20191025"

Example 2:
Software: Codesys 3.5 SP13 Patch3
X2 control connected to GN-9273 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.
"X2_GN9273_Param_35SP13P3_20191025"

Example 3: 
Software: WARP 1.14 b1371, Codesys 3.5 SP10 P1
X2 control connected to GN-9273 with GT-3704, GT-3114, GT-4114, GT-12DF and GT-226F.

The zip file "X2_GN9273_Param_WARP_20190516.zip" contains:
- Backup of WARP project "X2_GN9273_Param_WARP_20190516.WARPArchive"
- Backup of Codesys project "CODESYS_Project1.projectarchive"

Tip!
G series, X2 Control, Parameter Set of I/O Modules connected to GN-9289 or GN-9273

• X2_GN9273_2Slave_35SP13P3_20191025.projectarchive
• X2_GN9273_Param_35SP13P3_20191025.projectarchive
• X2_GN9273_Param_WARP_20190516.zip

Program example CANOpen X2 Control - GN-9261 - BCS-XP325

​Program example

CanOpen Manager = X2 Control 7" 

Slave devices = GN-9261 and BCS-XP325 (set to remote I/O mode)

WebRemoteConfiguration.config.txt = Configuration file for BCS-XP325.  NOTE! Remove ".txt"

Configuration of GN-9261

GN-9261|GT-3704|GT-1238|GT-2328

• ProgramExample_CANopen_X2Control_GN9261_XP325_BCS330.projectarchive
• WebRemoteConfiguration.config.txt

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3

​This program examples can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0014. Either download the manual below or the complete Smart Enginnering here.

PLC-program example is intended for a Nexto, X2-control/Marine/Extreme or PIO PLC communicating by Modbus TCP with 2 pieces of BFI-P2 and BFI-H3. Version of Library file for BFIP2H3ModbusTCP functionblock is 1.0.0.2.

There is also an iX-project supporting all Beijer PLC:s, all communication buses and and all BFI.

Program example support:

• Works only towards BFI Frequency inverters
• Activate/Deactivate communication
  
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

Another PLC-program example is for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

Program example iX Developer: Project for PLC-program generated in BCS Tools or Smart Engineering for PLC communicating with BFI by bus.

​The iX project can be used for Beijer PLC communicating with BFI. It supports PLC-programs generated in BCS Tools 3.62 or Smart enginnering objects SER 0014, 0015, 0017, 0020, 0039, 0040 and 0077. Project created in iX-version 2.50.

PLC can be X2(control/Marine/Extreme), Nexto Xpress, Nexto Modular or PIO.

Buses can be one of or a mix of EtherCat, Modbus TCP, Modbus RTU, CANopen, Profinet, EtherNet IP.

Frequency inverters can be BFI-E3, BFI-P2 or BFI-H3.

• iX_BFIAllbusesV105.zip

Program example BCS Tools and iX: EtherCAT communication between Nexto PLC/X2control and BFI-P2 BFI-H3

This program examples can be Auto configurated in BCS Tools 3.62. The Auto configuration for EtherCAT is turned ON/OFF in BCS Tools, Tools/Options/Device Configuration.

This program example is also to be found as Smart Engineering object, SER0017. Either download the manual further down for SER0017 or the complete Smart Engineering here. If using this program example make sure that Device Configuration is turned OFF.

Program example is intended for a Nexto, X2-control/Marine/Extreme communicating by EtherCat with 2 pieces of BFI-P2 and BFI-H3.

Version of Library file for BFIEtherCat functionblock is 2.0.0.0.

Program example support:

• Works only towards BFI Frequency inverters
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
  
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status.
• Read and Write of parameters
• Read of Drive type, communication type, Input voltage, Power, Frame size, Firmware and serialnumber 
  

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One iX-project to monitor/control BFI through the PLC. 

Another PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

Program example Px (X2/BoX2 control/Nexto Xpress/Modular - BSD v3.37

​This program example contains everything you need in order to get your X2/BoX2/Nexto control solution with BCS Tools and BSD products up and running using basic servo functionality.

Programming environment needed for this example:
- iX Developer v2.51
- BCS Tools v3.62

The startup example contains:
 - BCS362_Px_v337.projectarchive : BCS Tools project for X2 control 7 (powerfail) and 8 servo axis.
 - BCS362_Px_v337_NX3008.projectarchive : BCS Tools project for BCS-NX3008 and 8 servo axis.

 - iX251_X2_Pro_7_BSD_CSx_Px_v504 : iX project version 5.04 for X2 control 7"

Note!

• iX project iX251_X2_Pro_7_BSD_CSx_Px_v504 must be used in combination with BCS Tools project BCS362_Px_v337.projectarchive due to name changes of variables.
  
• Name change SC -> CSx_Px, CS = Cyclic Synchronous, P = profile mode, x = generic term for either position (P), velocity (V) or torque (T)
  
• Some cosmetic changes
  

• BCS362_BSD_Px_v337.projectarchive
• BCS362_BSD_Px_v337_NX3008.projectarchive
• iX251_X2_Pro_7_BSD_CSx_Px_v504.zip

X2 control StartUp Guide Basic Settings SUEN284

​​

• StartUp_iX_X2control10_BasicSettings_v002.zip
• StartUp_iX_X2control7_BasicSettings_v002.zip
• X2 control StartUp Guide Basic Settings_SUEN284.pdf

X2 Control (image 1.4 b581), StartUp Document and Links (Obsolete)

This document is superceeded by SUEN00392.

The following documents and software is useful when working with X2 Control

1. StartUp document for X2 Control
   X2 control StartUp Guide Basic Settings SUEN284 "Link to document"
   
2. Image for X2 Control
   X2 Pro - X2 Control - Image V1.4b581 (X2ImageLoader_build581.exe) "Link to document/file"
   
   Install/Update image V1.4b581 in X2 Control
   Update of Image to V1.4b581 requires update of related EBOOT Build 581 as well.
   The update must be done with a SD card.
   More information in "X2 Image manual MAEN205B" (chapter 4) "Link to document"
   
   Instruction on how to update the image on a X2 panel using "X2ImageLoader_buildxxx.exe" (Image Loader) and a Recovery SD Card.
   1. Insert and format a SD memory card on your computer.
   2. Execute "X2ImageLoader_buildxxx.exe".
   3. Select "Make Recovery SD Card" and "Select drive:" the SD memory cards drive letter.
   4. Select button "Create". Files is copyed to SD card. The text "Ready" appears in left bottom when ready.
   5. Insert the SD card in to the panels memory card reader and Power on or Reboot the panel.
   6. The panel starts up in "SD Update mode". The text "Do not turn power off!" appears in center of the display.
   7. Information of the update process is displayed in the lower left corner.
   8. Remove SD card and Reboot the panel when the text "Image Restoration complete".
   9. When the welcome screen is displayed on the panel is the update completed.
   NOTE! Very important to not Power cycle the panel during the update process!
    
3. CODESYS Runtime in X2 Control
   The CODESYS v3.5.10.10_16 should always be installed to a X2 Control with image V1.4b581
   CODESYS v3.5.10.10_16 "Link to document/file"
   
   Install CODESYS Runtime v3.5.10.10_16 to X2 Control
   Instruction on how to update the CODESYS Runtime using "X2ImageLoader_buildxxx.exe" (Image Loader), see chapter 4.4 in  "X2 Image manual MAEN205B"
   Instruction on how to update the Codesys on a X2 control panel using USB memory.
   see chapter 4.5 in  "X2 Image manual MAEN205B"
   
   NOTE! If you need to change the setup for CODESYS Runtime you have too
   - First install the image and then the CODESYS Runtime again.
   
   
4. Install Device Descripition in CODESYS
   Install the "XML-file" to CODESYS software
   X2 control CODESYS device XML  v3.5.10.10.2 "Link to document/file"

• X2_Control_Tips_Link_20190415.pdf

X2 Control (image 1.2 b508), StartUp Document and Links (Obsolete)

This document is superceeded by SUEN00392.

Note! New version; Image 1.4 B581) "follow this link"

The following documents and software is useful when working with X2 Control

1.       StartUp document for X2 Control.
There are some missing information and we will update the document (soon).
X2 control StartUp Guide Basic Settings SUEN284
http://www.beijerelectronics.com/en/support/Help___online?docId=67118

2.       Image for X2 Control
Build 508 are the first image version.
X2 control image 1.2 (build 508)
http://www.beijerelectronics.com/en/support/Help___online?docId=67114

3.       CODESYS Runtime in X2 Control
The CODESYS should always be installed to a X2 Control
CoDeSys v3.5.10.10_5
http://www.beijerelectronics.com/en/support/Help___online?docId=67116

4.       Install CODESYS  Runtime to X2 Control
- Update the CODESYS Runtime using USB, see page 17
- * Answer the questions that appear on screen, see "X2_Control_Instal_Codesys_picture20170615.pdf"
* If you need to change the setup for CODESYS Runtime you have too
- First install the image
- and then the CODESYS Runtime again

5.       X2 image manual
http://www.beijerelectronics.com/en/support/Help___online?docId=67122

6.       Install device desricpition in CODESYS
Install this "XML" to CODESYS software
X2 control CODESYS device XML
http://www.beijerelectronics.com/en/support/Help___online?docId=67115

7.       SetUp X2 Control and EtherCAT
More information in "X2_Control_EtherCAT_20180620.pdf"

Other information

• StartUp document for iX TxB-SC and ModBus RTU.
  Can be used for "how to do". Don't use the references of driver version!
  Start-up: iX TxB SoftControl, NA-9173/NA-9473 Modbus RTU (KI00378) (Codesys runtime 3.5.7.10)
  http://www.beijerelectronics.com/en/support/Help___online?docId=65810

• StartUp document for iX TxB-SC and ModBus TCP.
  Can be used for "how to do". Don't use the references of driver version!
  Start-up: iX TxB SoftControl, FnIO-S Serie ModbusTCP (KI00377) (Codesys runtime 3.5.7.10)
  http://www.beijerelectronics.com/en/support/Help___online?docId=65811

• StartUp document for iX TxB-SC and EtherCAT.
  Can be used for "how to do". Don't use the references of driver version!
  Start-up: iX TxB SoftControl, NA-9286 EtherCAT (KI00376) (Codesys runtime 3.5.7.10)
  http://www.beijerelectronics.com/en/support/Help___online?docId=65812

• X2_Control_EtherCAT_20180620.pdf
• X2_Control_Install_Codesys_picture20170615.pdf
• X2_Control_Tips_Link_20180620.pdf

Quick Start Guide, MELSEC Qnn QJ71E71 Ethernet to X2 series SUEN405

​Communication driver in X2: MC Protocol

• MELSEC Qnn QJ71E71 Ethernet - X2 series SUEN00405.pdf

Quick Start Guide, MELSEC iQ-R Ethernet - X2 series SUEN00406

​Communication driver X2: MC Protocol

• MELSEC iQ-R Ethernet - X2 series SUEN00406.pdf

Quick Start Guide, MELSEC QnUDE Ethernet to X2 series, SUEN00403

​Communication driver X2: MC Protocol

• SUEN00403 - MELSEC QnUDE Ethernet to X2 series.pdf

Quick Start Guide, MELSEC FX5U/FX5UC Ethernet to X2 series, SUEN00402

• SUEN00402 - MELSEC FX5U_FX5UC Ethernet to X2 series.pdf

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-E3

This program example can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0020.  Either download the manual below or the complete Smart Enginnering here.

Program examples are intended for a Nexto PLC NX-30xxx or XP3xx, X2-control/Marine/Extreme or PIO communicating by Modbus TCP with 2 pieces of BFI-E3 Version of Library file for BFICanOpen functionblock is 1.0.0.1.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3-xxx-MTP
  
• Activate/Deactivate communication
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

One PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Program example BCS Tools and iX: Modbus RTU communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

Sequence example BSD servo X2 control (iX/BCS Tools)

​BSD Startup program with added sequences to demonstrate how to handle:
- start/stop, manual/auto, reset and debug* mode
- calibration of one axis with simulated home sensor
- simple movement of one axis with handshake to main sequence
- interface using 'Outputs'-POU making code clearer and easier to debug

*Debug-mode is a feature to single step through a sequence:
1. Activate 'Debug'-mode
2. Activate 'Auto'-mode
3. Press 'Start'. The sequence will start.
4. As soon as the step condition is fulfilled the sequence will stop.
5. Press 'Start'. The sequence will move into the next step and start.

Note1: Pressing 'Stop' will halt/pause the sequence. In order to completely reset all sequences press and hold 'Stop' for 5s.

Note2: The 'HMI-Enable'-functionality requires the sequence example to be in 'Manual'-mode.

- - - - - - - 

The example contains two files:
HMI-application (iX-version: 2.40 SP7, build 2.47.417.0): X2_Control_7_ControlExample_v401.zip

Control application (BCS Tools 3.34, compiler 3.5.13.30): BCS 334_SP13_X2_control_SequenceExample.projectarchive

Download iX Developer and BCS Tools from our homepage:
https://www.beijerelectronics.com

• 220711 Sequence example X2 control BSD iX BCS Tools.zip

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC with CODESYS (all image versions) - Startup, recommendations and limitations (SUEN00392)

​The attached document provides important information when working the Beijer Electronics X2/BoX2 series range of products with embedded CODESYS control

Note!
BCS Tools 3.30 and newer is the supported and common software platform and shall be used for X2/BoX2 and G-series as well as the Nexto range of products.

Please visit https://smartstore.beijerelectronics.com/

More details can be found in SUEN00392

• X2_BoX2 series with Codesys – Recommendations and limitations SUEN00392F.pdf

​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

​​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

• MTBF Summary X2 pro, X2 control, X2 motion, X2 marine.pdf

X2 export control and dual use

• X2 Export Control and Dual Use_B2.pdf

X2 Letter of Volatility

​​​X2 Letter of Volatility

X2 base, X2 pro, X2 marine, X2 control, X2 motion

• X2_letter of volatility .pdf

Battery test summary - X2 pro, X2 control, X2 marine

• Battery Test Summary BR2032.pdf

Release notes PIEN344D / Last minute notes PIEN345D

Release notes for software image X2 v1.4 B581 (June 2018). 

Supporting all model types of X2 pro / X2 marine / X2 control.

Click here to download the Image V1.4 b581. 

Note! This image is obsolete, use latest version.

• X2 LastMinuteNotes PIEN345D.pdf
• X2 ReleaseNotes PIEN344D.pdf

DoC ECCN for X2 series HMI

• Declaration of conformity ECCN X2 2024-03-18.pdf

​SDoC Green Passport

​SDoC Green Passport

X2 pro, X2 control, X2 motion, X2 marine

• SDoC Green Passport X2 pro, X2 control, X2 motion, X2 marine(PROD CERT - 1164496 - 1 - A1) - 1.pdf

RoHS and REACH Declaration of Conformity

• RoHS and Reach Declaration of Conformity Beijer Electronics AB (PRODCERT - 2083745 - 1 - A1) - 1.pdf

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

​Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

• Environmental Impact Report X2_rev4.pdf

​FCC Verification X2 control

​FCC  Verification X2 control

X2 control 4, X2 control 7, X2 control 10, X2 control 12, X2 control 15

• X2 control 10_Verification FCC.pdf
• X2 control 12_Verification FCC.pdf
• X2 control 15 option CiX-CAN_Verification FCC.pdf
• X2 control 4_Verification FCC.pdf
• X2 control 7 option CiX-CAN_Verification FCC.pdf

ABS Type certification X2 pro, X2 marine, X2 control

​X2 ABS Type approval certificate 16-SQ1516745-PDA

X2 pro, X2 marine, X2 control

NOTE! not valid for X2 pro 21

• 21-2135529-PDA cert.pdf
• 21-2135529-PDA list.pdf
• ABS Type approval.pdf

ABS PDA certification X2 pro, marine, control, motion

​X2 pro, marine, control, motion ABS PDA certification

• X2 pro, marine, control, motion ABS PDA certificate No.16-SQ1516745-PDA (PROD CERT - 1206668 - 1 - A1) - 1.PDF
• X2 pro, marine, control, motion ABS PDA List for No.16-SQ1516745-PDA (PROD CERT - 1206669 - 1 - A1) - 1.PDF

DoC Green Passport Declaration

​DoC Green Passport Declaration

X2 pro, X2 control, X2 motion, X2 marine

• Green Passport Declaration X2(IFS1164495)_C.pdf

​​DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

​​DoC CE, EMC, RoHS Declaration of conformity

X2 pro, X2 control,  X2 marine, X2 web, Box2 pro

• DoC CE manufacturer declaration X2 promarine 1-08-2024.pdf

DNV certification ​​X2 pro, X2 marine, X2 control

​DNV certification​​​ ​​X2 pro, X2 marine, X2 control

Not available for X2 pro 21

• TAA00000N8-revision1.pdf

LR Type approval certificate X2 pro, X2 marine, X2 control, X2 motion

X2 LR Type approval certificate  C1760002

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

• LR22242389TA -Appendix.pdf
• LR22242389TA- DAD.pdf
• LR22242389TA- TAC.pdf

Compass safe distance X2 pro/control/motion/marine

​Compass safe distance X2 pro/control/motion/marine

• Compass safe distance X2 pro_ control_Motion_marine.pdf

Manufacturer declaration: X2 pro marine control UKCA Declaration of Conformity

​Manufacturer declaration: X2 pro marine control UKCA Declaration of Conformity

• X2 pro marine control UKCA Declaration of Conformity.pdf

​​CE Verification X2 control

​​​CE Verification X2 control

X2 control 4, X2 control 7, X2 control 10, X2 control 12, X2 control 15

​

• TMXD2112002086DE_X2 control 15 - B2_EMC Verification.pdf
• TMXD2112002091DE_X2 control 7 - B2_EMC Verification.pdf
• TMXD2112002094DE_X2 control 4 - B2_EMC Verification.pdf
• TMXD2112002097DE_X2 control 10 - B2_EMC Verification.pdf
• TMXD2112002100DE_X2 control 12 - B2_EMC Verification.pdf

BV Type approval certificate ​X2 pro, X2 marine, X2 control, X2 motion

​X2 pro, marine, control, motion BV Type approval certificate

Certificate number: 47303/B0 BV

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

​

• 47303_C0 BV.pdf

RS certification ​​X2 pro, X2 marine, X2 control

• TAC_21.10017.262.pdf

​CCS Marine Certificate X2 extreme, pro, control, marine

​CCS Marine Certificate X2 extreme, pro, control, marine

• CCS certificate 2022.pdf

KR ​certification​​​ ​​X2 pro, X2 marine, X2 control, X2 motion

KR ​certification​​​ ​​X2 pro, X2 marine, X2 control, X2 motion

Not valid for X2 pro 21

• CPH33151-AC002_20220203_134955.PDF

DoC battery X2 pro/marine

​DoC battery X2 pro/marine 

• BR2032_EDBD-B24006-01DoC.pdf

NKK certificate X2 pro, X2 marine, X2 control, X2 motion

​NKK certificate X2 pro, X2 marine, X2 control, X2 motion  No.TA17170M (PROD CERT - 1231856 - 1 - A1) - 1

X2 pro, X2 marine, X2 control, X2 motion
NOTE! not valid for X2 pro 21

• NKK certificate X2 pro, marine, control 2022 (PROD CERT - 1856405 - 1 - A1) - 1.pdf

KCC, MSIP certificate, X2 control 10, X2 motion 10

​KCC, MSIP certificate, X2 control 10, X2 motion 10

• KCC, MSIP certificate, X2 control 10, X2 motion 10.pdf

Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI

• 6222S1.pdf

CAB108 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

​CAB108 Gender changer. 9pin Dsub male/male

• CAB108.pdf

CAB112 Cable Drawing for X2 control, TxA/TxB SoftControl

​CAB112/3m Open ended RS485 cable to CREVIS I/O node for X2 control, TxA/B SoftControl

Length: 3m

• CAB112 3m.pdf

CAB111 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B operator panel

​CAB111/3M Straight RS232 cable to CREVIS I/O node for X2 control iX Panel TxA/B SoftControl

Length: 3m

• CAB111 3m.PDF

CAB110 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

​CAB110 Cable for MELSEC Q Transparent mode for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

• CAB110-3m.pdf

CAB105 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between Allen Bradley Micrologix and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB105_3m.pdf

CAB106 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between OMRON Host Link and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB106_3m.pdf

CAB107, 25-pol to 9-pol adapter, Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

CAB107  9pin Dsub to 25pin Dsub, for using EXTER/E1000 422/485 cables on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 0,2 meters.

• CAB107.pdf

CAB109 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

CAB109 Y-split cable to utilize more than two COM ports on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 2 x 0,1 meters.

• CAB109.pdf

Cable CAB154: Cable for CANopen between X2 Control and BFI

​Cable has a D-sub connector with built in 120 ohm resistance intended for X2 Control and one RJ45 connector inteded for BFI_P2 or BFI-E3 

• CAB154.pdf

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug​
Used when RS422 point to point communication is used 

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

​3 way splitter cable
Used when 2xRS485 are needed

• CSS-DWG-1509005 100-0526 CAB150.pdf

CAB104 Cable Drawing forX2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between PC standard RS232 and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C 

Cable length: 3 meters.

• CAB104_3m.pdf

CAB103 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

 Cable between MELSEC FX1/2/3-series and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters in drawing CAB103_3m.pdf.

Cable length: 10 meters in drawing CAB103_10m.pdf.

Cable length: 15 meters in drawing CAB103_15.pdf.

• CAB103_10m.pdf
• CAB103_15m.pdf
• CAB103_3m.pdf

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and  X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB101_3m.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB100_3m.pdf

​​Outline drawing, X2 pro 10, X2 control 10, X2 motion 10

​​Outline drawing, X2 pro 10, X2 control 10, X2 motion 10

• X2 pro 10, X2 control 10, X2 motion 10, Outline drawing.dwg
• X2 pro 10, X2 control 10, X2 motion 10, Outline drawing.PDF

​​Cutout drawing, X2 pro 10, X2 control 10, X2 motion 10

​​Cutout drawing, X2 pro 10, X2 control 10, X2 motion 10

• X2 pro 10, X2 control 10, X2 motion 10, Cutout drawing.PDF

​​3D drawing, X2 pro 10, X2 control 10, X2 motion 10 in STEP format

​​3D drawing, X2 pro 10, X2 control 10, X2 motion 10 in STEP format

• X2 pro 10, X2 control 10, X2 motion 10, 3D drawing.STEP

iX Developer Reference Manual, MAEN355 rev. B (current version)

• iX250 ReferenceManual MAEN355B.pdf.pdf

X2 base / pro / extreme / marine / control - Configuration and Image manual , MAEN352 rev B

MAEN352B: describes the X2 series system program V2.2 and later . 

This manual replaces MAEN205 rev. G

• X2_Configuration_MAEN352B_2024-05-02.pdf

Manual: Solution EtherCAT communication Nexto PLC/X2control with BFI-P2 BFI-H3

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

Manual: Solution Modbus RTU communication Nexto PLC/X2control/PIO with BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

​​Installation Manual X2 pro, X2 marine, X2 control MAxx202

​​Installation Manual X2 pro, X2 marine, X2 control

• Chinese Simplified
• Chinese Traditional
• English
• French
• German
• Italian
• Portuguese Brazil
• Spanish

• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Chinese Simplified.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Chinese Traditional.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 French.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 German.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Italian.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Portuguese Brazil.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Spanish.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-E3

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-P2 BFI-H3

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

Installation manual for X2 control 10 - B2, MAEN221 English

• X2_control_10_-_B2_MAEN221_English.pdf

​Guidelines for TxA and TxB migration to X2.

​​Guidelines for TxA and TxB migration to X2.

• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pdf
• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pptx

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Remote Access Viewer is a program for remote access and control Exter/E1000 - TxA/TxB/TAxx - X2 panels.

It is possible to access, reflect and control panels from a PC by using the VNC client program, Remote Access Viewer (freeware), together with the built-in VNC server (Remote Access function) in the iX Panels.

NB: Even though the help file suggests another key combination, please note that Ctrl-Alt-Shift-F toggles Full screen mode on / off best, so you Restore from Fullscreen mode with this key combination! 

vncviewer.exe_patch.zip contains a patched vncviewer.exe

• MA00756.pdf
• RemoteAccessViewerSetup 1.5.4_iX.exe
• vncviewer.exe_patch.zip

EDS file for CiX-CAN and X2

EDS_CiX-CAN.zip includes EDS files for the CiX-CAN module:

CiXCANopen.eds                                      General EDS file

CiXCANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

CiXCANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

CiXCANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

CiXCANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

EDS_X2.zip includes EDS files for the internal CAN on X2 (extreme) panels:

X2CANopen.eds                                      General EDS file

X2CANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

X2CANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

X2CANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

X2CANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

​

• EDS_CiX-CAN.zip
• EDS_X2.zip

X2 control CODESYS device XML, v3.5.10.10.1 (Obsolete)

Device description for X2 control  :
X2 control 4
X2 control 7
X2 control 10
X2 control 12
X2 control 15
This device description (v3.5.10.10.1) should be used for X2 Control with image 1.2 build 508

• X2 control device xml_v35_10_10_1.zip

X2 control / X2 extreme SC / X2 marine SC / BoX2 pro SC / BoX2 extreme SC, CODESYS Device XML 3.5.13.30.1 (Current version)

​Device descriptor files for the X2 series, Soft Control editions of HMI and Edge devices. This version is to be used on runtime 3.5.13.30 patch 7 or higher and in conjuction with X2 series images, version 2.0 or higher. Link to image 2.0 b368

• v3.5.13.30.1.zip

GSD files for CiX-DP Profibus module

• BE09DA2.GSD
• BE09DA3.GSD

X2 series (German)

​36-page brochure incl. general and product family descriptions, technical data, iX and WARP software descriptions, migration paths, etc.

• BRDE631E - X2 brochure_2019_15aug.pdf

X2 brochure (Spanish)​

X2 brochure (Spanish)​

• BRES631A- X2 brohure_low.pdf

X2 brochure 2019 (French)

• BRFR631E - X2 brochure_2019_15aug.pdf

X2 brochure (English), BREN631

​​36 page brochure incl. general and product family descriptions, technical data, iX and acirr+ software descriptions, migration paths, etc. Incl. X2 extreme, X2 pro21 and two-year warranty

• BREN631F - X2 brochure_210309.pdf

X2 control image 1.2 b508 (Obsolete)

​​X2 control image 1.2 b508 (Obsolete)

• X2 image 1.20 LastMinuteNotes PIEN345B.pdf
• X2 image 1.20 ReleaseNotes PIEN344B.pdf
• X2 ImageLoader 1.2 build508.zip

X2 control / X2 marine SC / BoX2 pro SC image V2.0 b775 (Obsolete)

​Image release for X2 series Soft Control devices (acirro+ from production only).

Link to related documents:

Codesys runtime, 3.5.13.30 Patch7
https://www.beijerelectronics.com/en/support/Help___online?docId=68403

• MAEN205D_BoX2 Image Manual.pdf
• New LED information.PNG
• X2 LastMinuteNotes PIEN345I.pdf
• X2 ReleaseNotes PIEN344I.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build775.exe

X2 control / X2 marine SC / BoX2 pro SC / BoX2 pro motion image V2.1.1 b906

Check on SmartStore for latest image version!

​Image supporting X2 control, X2 marine SC, BoX2 pro SC and BoX2 pro motion.

• BoX2 Image Manual MAEN205D.pdf
• X2 LastMinuteNotes 2.1.1.pdf
• X2 ReleaseNotes 2.1.1.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build906.exe

CODESYS Runtime v3.5.10.10_16 (Obsolete)

The CODESYS v3.5.10.10_16 should always be installed to a X2 Control with image V1.4b581

• Codesys v3.5.10.10_16.zip

X2 pro - X2 control - Image V1.3b569 (Obsolete)

X2 image v1.3 Build569

NOTE! Update of Image requires update of related EBOOT Build 569 as well.
Update EBOOT via “Make Recovery SD Card”, see “Beijer Panel Image manual" (MAEN205x) for information.
- The EBOOT is included when you create "Recovery SD" from the Image Loader.

• X2 image manual MAEN205B.pdf
• X2 image v1.3 Build569.exe
• X2 image v1.3 LastMinuteNotes PIEN345C.pdf
• X2 image v1.3 ReleaseNotes PIEN344C.pdf

CODESYS Runtime v3.5.10.10_5 (Obsolete)

​CODESYS Runtime for X2 control (image 1.2 Build508)

• CoDeSys v3.5.10.10_5.zip

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC CODESYS Runtime 3.5.13.30 Patch 7 (obsolete)

​CODESYS Runtime with individual device xml for every single X2 device.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CODESYS-3.5.13.30_7.zip

X2 control / BoX2 pro SC CODESYS Runtime 3.5.13.30 Patch 12 (Current version)

​SoftPLC runtime for X2 control 2.1.1 and later. Contains fixes for CmpPLCShell.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CoDeSys_3.5.13.30_12.zip
• Device XML.zip

X2 pro / X2 marine / X2 control - Image V1.4 b581 (Obsolete)

​Firmware/image version 1.4 build 581 to  X2 pro / X2 marine / X2 control

Click here to download Release notes PIEN344D / Last minute notes PIEN345D.

• X2ImageLoader_build581.zip