ML9089
M9222
M9273
M9287
M9289
M9386
MD9273
MD9289
MD9289
Network adapter
- MODBUS TCP (Dual Type)
- 128 bytes (input + output)
- Redundancy network and power
- Up to 63 expansion slices
- M7001 power module
- 18pt removable terminal block (RTB18C)
Facts
General description
| Article number | 100-8211 |
| Warranty | 2 year |
| Article status | Active |
| Shock operating | IEC 60068-2-27 (15G) |
| Vibration resistence | Sine vibration (based on IEC 60068-2-6), DNVGL-CG-0339 (Vibration Class B, 4G) |
| Industrial emissions | EN 61000-6-4/2019 |
| Industrial immunity | EN 61000-6-2 : 2019 |
| Horisontal, Vertical | |
| System power | UL System Power: Supply voltage : 24 VDC nominal, Class 2 System Power, Supply voltage : Class 2, 24 VDC nominal, Supply voltage range : 15~28.8 VDC, Protection : Output current limit / Reverse polarity protection |
| Power dissipation | 150 mA typical @ 24 VDC |
| Current for IO module | 2.0A @ 5 VDC (If except for NA, current for I/O module is about 1.6A) |
| Isolation | System power to internal logic : Non-isolation, System power I/O driver : Isolation |
| Field power | Supply voltage : 24 VDC typical (Max.28.8 VDC), * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max current field power contact | DC 10A Max |
| Weight | 356g |
| Module size | 25.7 x 107.5 x 56.5 mm |
Certifications
| General | CE, FCC, UL, cUL |
| Hazardous | ULC1D2, ATEX (Zone2) |
| Marine | DNV GL |
| Safety | UL508, CAN/CSA C22.2 No.142-M1987 |
Communication
| Redundancy | Yes |
| Station type | Slave |
| Max expansion ports | 63 slices |
| IO data size | 128 bytes (input + output) |
| Max length bus line | 100 m (Ethernet tech.) |
| Max network nodes | Limited by Ethernet Specification |
| Baud rate | 100 Mbps, Auto-negotiation, Full duplex |
| Bus connection | 2 x RJ45 |
| Other serial port | RS232 for MODBUS RTU (Touch Panel or IOGuide) |
| Serial configuration | Node: 1 (Fixed), Baud Rate: 115200 (Fixed), Data bit: 8 (Fixed), Parity bit: No parity (Fixed), Stop bit: 1 (Fixed) |
| Indicator | 5 LEDs: 1 Green/Red, Main module Status (PRI), 1 Green/Red, Module Status (MOD), 1 Green, Physical, Connection (LINK), 1 Green, Exchange Data/Traffic Present (ACT), 1 Green/Red, Expansion I/O Module Status (IOS), 2 LEDs (each RJ45 Connector): 1 Yellow, Link/Active, 1 Green, Not used |
| Module location | Starter module left side |
| Field power detection | ~14 VDC |
Environmental
| Mounting | 35mm DIN rail |
| Operating temperature | -25 ~ 60℃ |
| Storage temperature | -40 ~ 85℃ |
| UL temperature | -25 ~ 60℃ |
| Relative humidity | 5 ~ 90% non-condensing |
Power module specifications
| DC 10A Max | |
| Field power voltage | 24VDC |
| Indicator | M7001: 4 LEDs: 1 Green, M-Bus Status (RUN), 1 Green, Primary Status(PRI), 1 Green, Active Status (ACT), 1 Green, Field Power Enable (Field Power) |
| Input voltage range | 15 VDC to 28.8 VDC |
| Power input voltage | 24VDC |
Resources
Knowledge
| File name | Date | |
|---|---|---|
| Firmware upgrade instruction for G- and M-series network adapters | 2024-12-02 10:26:06 | |
| M9289 and MD9289 - Setting the IP address | 2024-06-24 15:17:35 | |
| Ethernet port specification of G- / M-series PIO and Network adapters | 2024-05-03 07:55:52 | |
| Always add a power module (M7001/7002) after the network adapter | 2023-08-09 15:20:30 | |
| Common noise filter NBH-06-432-D to FnIO S- and M-series (for DNV certificate) | 2022-09-06 11:36:38 | |
| FnIO M-, G- and S-series Serial number and Production date | 2023-07-20 11:30:16 | |
| Shock resistance of G- and M-series (IEC 60068-2-27) | 2022-09-06 14:16:00 | |
| How to download Free software packages from SmartStore | 2023-08-08 15:52:30 |
Manuals
| File name | Date | |
|---|---|---|
| MD9289 MODBUS TCP M-Series Network Adapter (Dual type) | 2022-09-06 11:38:41 | |
| M-Series Common User Guide & Hotswap functionality | 2022-09-06 14:15:24 |
Product information
| File name | Date | |
|---|---|---|
| Conversion guide for alternative products between S-series remote IO to G- or M-series | 2022-09-06 11:38:29 |
Certificates
| File name | Date | |
|---|---|---|
| UL & cUL Certificate of compliance - Beijer M-series | 2022-11-11 08:37:00 | |
| UL-HAZLOC Certificate of compliance - Beijer M-series | 2022-11-11 08:37:24 | |
| DNV GL - Type Approval Certificate - Beijer M-series | 2025-01-10 15:21:18 | |
| Beijer M-series certificate overview | 2022-11-17 07:00:20 | |
| ATEX Zone 2 Certificate - Beijer FnIO M-series | 2022-11-15 08:20:20 | |
| CE DoC - Beijer M-series including EMC, LVD, RoHS-II & Reach | 2025-01-13 09:01:11 | |
| FCC DoC - Beijer M-series | 2022-11-11 08:35:14 |
Information document
| File name | Date | |
|---|---|---|
| Beijer M-series Caution and Warning (ATEX & RoHS) Rev.3.02 | 2022-11-11 08:55:42 |
Software
| File name | Date | |
|---|---|---|
| IO Guide Pro 2.0.0.0 beta (20231128), for Beijer G- and M-series | 2024-09-24 08:11:21 |
Drawings
| File name | Date | |
|---|---|---|
| M-series Drawing, 2D CAD files (Electrical) | 2023-02-23 15:28:43 | |
| M-series Drawing, 3D / 2D CAD files (Mechanical) | 2023-02-23 15:28:30 |
Smart Engineering Resources
Limited availability
MD9289
Network adapter
EOL - End Of Life:
-
LTB - Last Time Buy:
-
LTD - Last Time Delivery:
-
LTR - Last Time Repair:
-
Replacement Parts:
