M9372

Programmable I/O with CODESYS

  • Programmable I/O standard
  • 2 x Ethernet 10/100Mbps
  • 16 MB program memory
  • 16 MB data/32 KB Non-Volatile memory
  • Up to 63 expansion slices
  • M7001 power module
  • 18pt removable terminal block (RTB18C)
Contact sales

Facts

General description

Article number 100-8201
Warranty 2 year
Shock operating IEC 60068-2-27 (15G)
Vibration resistence Sine vibration (based on IEC 60068-2-6), DNVGL-CG-0339 (Vibration Class B, 4G)
Industrial emissions EN 61000-6-4/A11: 2011
Industrial immunity EN 61000-6-2 : 2019
Horisontal, Vertical
System power UL System Power: Supply voltage : 24Vdc nominal, Class 2 System Power, Supply voltage : Class 2, 24Vdc nominal, Supply voltage range : 15~28.8Vdc, Protection : Output current limit / Reverse polarity protection
Power dissipation 110mA typical @ 24Vdc (PIO+Power Module), (Network Adapter : 80mA typical @ 24Vdc), (M7001 Module : 30mA typical @ 24Vdc)
Current for IO module 2.0A @ 5Vdc (If except for NA, current for I/O module is about 1.7A)
Isolation System power to internal logic : Non-isolation, System power I/O driver : Isolation
Field power Supply voltage : 24Vdc typical (Max.28.8Vdc), * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification.
Max current field power contact DC 10A Max
Weight 179g
Module size 54mm x 110mm x 75mm

Certifications

General CE, FCC, UL, cUL
Hazardous ULC1D2
Marine DNV GL
Safety UL508, CAN/CSA C22.2 No.142-M1987

Communication

Redundancy No
Station type Master & Slave Node (Modbus TCP, Modbus RTU)
Max expansion ports 63 slices
IO data size 128 bytes (input + output)
Baud rate 2400 ~ 115 200bps (RTU), 10/100Mbps, Auto-negotiation, Full Duplex (TCP)
Bus connection 9pin D-sub (RTU), 2 x RJ45 (TCP)
Other serial port RS232 for MODBUS RTU (Touch Panel or IOGuide)
Serial configuration Node: 1 (Fixed), Baud Rate: 115200 (Fixed), Data bit: 8 (Fixed), Parity bit: No parity (Fixed), Stop bit: 1 (Fixed)
Indicator 4 LEDs: 1 Green/Red, Module Status (MOD), 1 Green/Red, Network Status (NET), 1 Green/Red, PLC Run/Stop Status (RUN), 1 Green/Red, Expansion I/O Module Status (IOS)
Module location Starter module left side
Field power detection ~14VDC

Environmental

Mounting 35mm DIN rail
Operating temperature -25 ~ 60℃
Storage temperature -40 ~ 85℃
UL temperature -20 ~ 60℃
Relative humidity 5 ~ 90% non-condensing

Power module specifications

DC 10A Max
Field power voltage 24VDC
Indicator M7001: 4 LEDs, 1 Green, M-Bus Status (RUN), 1 Green, Primary Status(PRI), 1 Green, Active Status (ACT), 1 Green, Field Power Enable (Field Power)
Input voltage range 15Vdc to 28.8Vdc
Power input voltage 24VDC

Limited availability

M9372

Programmable I/O with CODESYS


EOL - End Of Life:
-

LTB - Last Time Buy:
-

LTD - Last Time Delivery:
-

LTR - Last Time Repair:
-

Replacement Parts: