M4218 M-Series Analog output

​8 Channels, Current Output, 4~20mA, 12bit

• [Spec] M4218 Beijer FnIO M-Series (Rev 1.04).pdf

M-Series Common User Guide & Hotswap functionality

• Beijer M-Series Common User Guide and Hotswap functionality Rev. 2.00.pdf

Common noise filter NBH-06-432-D to FnIO S- and M-series (for DNV certificate)

To fullfil DNV certificate standard, the common noise filter 'NBH-06-432-D' from Cosel need to installed between the power supply and the remote IO. The purpose of this is to suppress conductive emission of FnIO Series. If you use other noise filters, our DNV certificate will be ineffective. See attached datasheet of the specification of the filter and example how to connect this noise filter to the FnIO S-series, principle is the same for M-series.

DNV Approval FnIO S-series 
DNV Approval FnIO M-series

• Data_SFE_NBH.pdf
• Install_NBH-06-432D.jpg

FnIO M-, G- and S-series Serial number and Production date

​The serieal number of S-series is 11 digits, G- and M-series is based on 12 digits.
Note, for G- and M-series the last four digits xxxx.

Shock resistance of G- and M-series (IEC 60068-2-27)

According to IEC 60068-2-27 (shock operating) standard the general shock resistance is 15G for all G- and M-series modules.

Always add a power module (M7001/7002) after the network adapter

​The configuration of M-series network adapters and M-PIO always require to add a power module (M7001/7002) directly after the network adapter, then add the rest of the IO modules.

Note! The same configuration need to be made in the programming tool like example from CODESYS / BCS Tools. See attached file.

For example M9372+M7001+M12DF+M226F  

• Always add a power module after the network adapter (M-series).pdf

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

Conversion guide for alternative products between S-series remote IO to G- or M-series

​Use this PDF to chose a corresponding product. In some cases there are several alternatives that may need deeper investigating but in general:
- S- and G- (or M-) series modules cannot be mixed since they are mechanically different, however it is perfectly possible to have connect a S-series and G-series network adapter to the same network.
- The G-series is great all-purpose family that will work in most cases although not marine applications.
- The M-series is adapted for demanding applications and environments. It offers hot-swap and redundancy and is has a marine certifications.  

• FnIO Alternative module lists.pdf
• FnIO Alternative module lists.xlsx

UL & cUL Certificate of compliance - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules 

​NRAQ.E496087 - Programmable Controllers
NRAQ7.E496087 - Programmable Controllers Certified for Canada

• E235505-vol1-MLCertificateofCompliance-E496087.pdf
• NRAQ.E496087 - Programmable Controllers _ UL Product iQ.pdf
• NRAQ7.E496087 - Programmable Controllers Certified for Canada _ UL Product iQ.pdf

UL-HAZLOC Certificate of compliance - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules

Certified for Use in Hazardous Locations:
NRAG.E522453 - Programmable Controllers
NRAG7.E522453 - Programmable Controllers Certified for Canada

• E355715-Vol1-20210526 M-series certificate of compliance.pdf
• NRAG.E522453 - Programmable Controllers for Use in Hazardous Locations.pdf
• NRAG7.E522453 - Programmable Controllers for Use in Hazardous Locations Certified for Canada.pdf

DNV GL - Type Approval Certificate (Revision 1) - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules
DNV GL Type Approval Certificate TAA00002Z8-revision1 (​20211208)

Link to knowledge: Common noise filter NBH-06-432-D

• 20211208_TAA00002Z8-revision1.pdf

DNV GL - Type Approval Certificate (1st version)

TAA00002Z8 Type Approval Certificate (​20210426)

• 20210426_TAA00002Z8_Type Approval Certificate.pdf

Beijer M-series certificate overview

​2022.11.17 Latest update of the plans (Rev 1.07)

• Beijer M Series certificate overview (Rev 1.07).pdf

ATEX Zone 2 Certificate - Beijer FnIO M-series

• UL 22 ATEX 2690X Rev. 0.pdf
• US_UL_ExTR22.0008_00_000.pdf

​CE DoC - Beijer M-series including EMC, LVD, RoHS-II & Reach

• CE DoC for Beijer M-series products - Signed.pdf

FCC DoC - Beijer M-series

• FCC DoC for Beijer M-series products - Signed.pdf

Beijer M-series Caution and Warning (ATEX & RoHS) Rev.3.02

• Beijer M-Series Caution and Warnings - ATEX and RoHS (Rev302)_2022-10-17.pdf

IO Guide Pro 2.0.0.0 beta1

• (Beijer M-Series) IOGuidePro V2.0.0.0 beta.zip
• readme.txt_IOGuidePro2.0.0.0beta1.pdf

M-series Drawing, 2D CAD files (Electrical)

​​File extension: *.pdf *.dwg

• M-series 2D Diagram_20230103.zip

M-series Drawing, 3D / 2D CAD files (Mechanical)

​File extension: *.pdf *.dwg *.stp (step)

• M-Series 3D, 2D Sales Drawing_20220608.zip
• M-series 3D,2D CAD File_20230103.zip