X2 pro 4

IX otf and ttf fonts

23.11.2022
IX developer 2.40Sp7

X2 terminals (actually windows CE \ wec2013 ), do not support the newer OTF font standard ( OpenType Font) . Only TTF ( true type font) are supported for terminal targets, however on a PC RT ( Run Time ) you can use OTF.

It is possible to convert a OFT font to TTF: https://cloudconvert.com/otf-to-ttf

iX Developer SP7 - 2.47.473 Release information

Driver MODICON Modbus Slave: Command XDNCW

This command is used to disable the warning "No connection" when the terminal is disconnected to the master.

Windows CE versions, X2, iX, E1000

WindowsCE_X2_iX_E1000_.xlsx

Creating a custom Welcome Screen \ startup screen on a X2 pro operator panel

27.05.2020
X2 series

Place the desired splash picture in the projects "project files" folder.
The picture must be a .bmp file, with the exact screen size as the terminal.
FIlename: iXCustomSplash.bmp

After the download of the project, this picture will be used as splash screen .

Google Gmail end suport for " less secure apps " ends may 30 2022

05.04.2022

From 30'th of may 2022 gmail accounts no longer support "less secure apps".
This means that the IX / X2 terminals email client no longer can use the gmail servers. Switching to another major isp, such as AOL etc, probably will have a limited effect, since this probably will be implemented broadly on all major ISP's in the near future.

Beijer have no intentions to implement a secure email client on the current platform.

So the only way to use the current email client will be to use either an internal / local / private emailserver or relay software, requiering a local computer. or a subscription on some service that accepts less secure apps.

For the time being (April 2022), smtp.mail.yahoo.com is claimed to work.

To allow "less secure apps in Yahoo", Log in to Yahoo mailbox and go to Account Info page. Choose Account Security, and turn on the button of "Allow apps that use less secure sign in". See This for details

iX - SMTP - Using Gmail servers using App password

Google has dropped the support for "less secure apps" and no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.

From now on an "App Password" is required when sending emails from iX panels that are configured to use Gmail's SMTP servers. Please notice that 2 step verification is required in order to create an app password.

Create and use App Password

Login to you Google account.
Make sure 2-Step Verification is enabled.
Generate an App password. Select "Mail" as app and for device select "Other" and enter a custom name. Click Generate to get an app password.
Then use the following settings for the email device in the iX application

From Email Address: [Gmail address]
SMTP Server: smtp.gmail.com
Port: 587
Encryption Mode: ExplicitSSL
Authentication Mode: AuthLogin
Username: [Gmail address]
Password: [The App Password]

Set gmail App password .pdf

When are Data deleted from the ix x2 database / backup restore database

General:

IX developer will prior to download warn\tell you if data will be deleted from the existing database, and also which tables are concerned.

Data is only deleted for the specific datalogger,recipe system etc. where there have been doned changes such as:

- adding / deleting elements

- Changing type of tags (e.g. from INT16 to UINT16)

PS.

If you have made a change in your project, and then regret it, then you must close the project without build\rebuild\save.

If the change is saved(diskett symbol in upper left greyed out), it won't help to undo the change. nor close project or backup-reopen project.

The mechanism controlling this is a parameter " SchemaVersion=xy" stored in the assosiated .neo file in the project. e.g. DataLogger1.neo. SchemaVersion couns up changes that requires erase of data in the assosiated table. So if you e.g. change a parameter, save, and then change it back, and save again, The SchemaVersion vil tick up 2.
If you open this file, roll the number back, save it and reopen the project (reads the file on project open), then you should be good (assuming your number are correct). If you have a valid backup, you can perhaps find the original schemaVersion there.

Another posebility is to load the project from usb, with a proper database files in the project folder:
Do a backup of the database with IX developer, then do an export of the project to an USB stick. Then copy the backed up database.db file to the project folder on the usb. Now the database should be installed with the project from

the usb ,with all data intact.

Observe that there are Actions in IX to backup and restore both database, and non volatile tag data, to/from usb,sd,internal memory

OPC ua settings in Phoenix plxnext engineer

04 october 2022
To use IX OPC client with Phoenix PLC's some settings are needed in the PLxnext engineering tool:
Basic settings "Visibility of variables" = "Marked"
(see attacment for screenshots)

Subject1 = HMI ip adress
UNcheck "Use the thruststore for client authentication" AND " Check application URI against client certificate.

To get the NS ( namespace ) settings in IX developer correctly, the easiest way is to browse the Phoenix server from IX developer, by clicking the small down arrow at the right side of the "ADD" button in Tags, and select "Add tags from OPC server" . Then the nemespaces are set automaticly. Otherwise you can see them in the screenshot below:

phoenix_OPCUA.docx

Image Sticking

When utilizing TFT LCD HMI panels in applications where a fixed or partially fixed image remains displayed on the screen for extended periods of time, users may experience a phenomenon referred to by the LCD industry as Image Sticking. Image Sticking - sometimes also called "image retention" or "ghosting"- is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed.

Image sticking can be caused by:

Static images
No Screensaver
Sharp contrast transition (e.g. black / white)
High ambient temperatures

How can Image sticking be avoided or reduced:

Use the screensaver functionality.
Changing constantly between static and dynamic images
Avoid excessive brightness differences between foreground and background elements
Use colors with similar brightness
Use complementary colors in follow-up images

Best Practice Database on SD card or flash memory

This document provides recommendations for how to setup and use the X2 HMI panel in the best way to reduce unnecessary wear on the flash memory.

For more information: Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF

MAEN360.pdf

Driver Allen Bradley DF1: Behövs 1747-KE kommunikationsmodul ?

Svar:
Beijer rekommenderar modulen för att eliminiera eventuella elektriska störningar mellan PLC & terminal.

Det är upp till kunden att avväga denna risk, eftersom kommunikation kan fungera utan modul.

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

30.01.2023
X2 series

This Document describe how to enter the service menu, go to settings in the diagnostics part, and supress the flash wear warning message.

SUEN00411 Suppress FlashWear warning .pdf

Max number of recipe items / tags

iX developer 2.40 SP7

The help file states that maximum 256 recipe items can be used. This is wrong, maximum number of recipe items / tags / columns is 998.
When attemting to add more, iX will display a popup with an error message.

Convert from Exter/E1000 To X2 Series

The Mitsubishi E-Series hardware products and E-Designer software have been manufactured by Beijer Electronics for Mitsibishi for many years. In 2015, this partnership ended. Beijer-branded E1000 HMIs are now orderable directly through Beijer or one of its authorizated distributors. As your Mitsubishi terminals need to be replaced, Beijer provides a smooth transition by offering three paths:

Direct Replacement Path (E1000 panels) - A direct hardware and software replacement for most E1000 panels. The Beijer-branded E1000 panels are identical to the Mitsubishi-branded E1000 panels, only the rear labeling is different.

Direct Replacement Path (EXTER panels) - A direct mechanical drop-in hardware replacement is available for most E1000 products. The replacement products use your existing E-Designer applications after a simple project conversion to Information Designersoftware, a service offered by Beijer Technical Support

Upgrade Replacement Path (X2 panels) - Enhance your future HMI offering with modern X2 hardware and state-of-the-art iX Developer software including graphics, scripting, alarms, recipes, remote access and multiple communication drivers. iX Developer supports and integrated E-Designer to iX Developer project conversion feature (as well as Information Designer to iX Developer).

The following is a comparison chart of the older, discontinued E-series/CIMREX HMI panels to the current E1000/EXTER HMI panels, as well as the closest versions to Beijer''s latest X2 panels.

Discontinued	Discontinued	Current	Current	Adapter	Current
E-Series Models¹	CIMREX Models²	E-1000 Models³	EXTER Models⁴	Plate⁵	X2 Models⁶
E50	CIMREX 5	n/a	n/a	n/a	n/a
E100	CIMREX 10	E1012	K10m	n/a	X2 base 5
					X2 pro 4
E150	CIMREX 12	E1012	K10m	n/a	X2 base 5
					X2 pro 4
E200	CIMREX 20	E1022	K20m	Adaption Plate K20	X2 base 5
					X2 pro 4
E300	CIMREX 30	E1032	K30m	Adaption Plate K30	X2 base 5
					X2 pro 4
E410	CIMREX 41	E1043 (mono)	T40m⁵ (EOL)	n/a	X2 base 5
		E1041(color)	T40⁵ (EOL)		X2 pro 4
E600	CIMREX 60	E1060 (color)	K60m	Adaption Plate K60	X2 base 7
		E1062 (mono)			X2 pro 7
E610	CIMREX 67	E1063	T60m⁵ (EOL)	Adaption Plate T60	X2 base 7
					X2 pro 7
E615	CIMREX 69	E1061	T60⁵ (EOL)	Adaption Plate T60	X2 base 7
					X2 pro 7
E615T	CIMREX 69T	E1061	T60⁵ (EOL)	Adaption Plate T60	X2 base 7
					X2 pro 7
E700	CIMREX 70	E1070	K60 or K70	Adaption Plate K70	X2 base 7
					X2 pro 7
E710	CIMREX 71	E1071	T70	Adaption Plate K70	X2 base 7
					X2 pro 7
E900T	CIMREX 90	E1100	K100	Adaption Plate K100	X2 base 10
					X2 pro 10
					X2 pro 12
E900TD	CIMREX 90D	E1100	K100	Adaption Plate K100	X2 base 10
					X2 pro 10
					X2 pro 12
E900VT	n/a	E1100	K100	n/a	X2 base 10
					X2 pro 10
					X2 pro 12
E910T	CIMREX 91	E1101	T100	Adaption Plate T100	X2 base 10
					X2 pro 10
					X2 pro 12
E910TD	CIMREX 91D	E1101	T100	Adaption Plate T100	X2 base 10
					X2 pro 10
					X2 pro 12
n/a	n/a	E1151	T150	n/a	X2 pro 15

1 The Beijer-built E-series models were branded for Mitsubishi. The CIMREX models were the Beijer-branded versions of the early E-series models. All were discontinued a number of years ago.

2 The E1000 models are upgrades from the older, discontinued E-series models. Historically, the Beijer-built E1000 models were branded for Mitsubishi, but now carry a Beijer brand. The E1000 are now only available from Beijer or an authorized distributor; they are no longer available from Mitsubishi. E1000 programming is based on E-Designer software which can now only be obtained from Beijer.

3 The Beijer-built and branded EXTER models are virtually identical to the E1000 models. EXTER programming is based on Information Designer software. Beijer Technical Support can convert an E-Designer program to an Information Designer program, if required.

4 X2 models are not 100% replacement models for the E1000 or EXTER models. They have different form-factors; there are no X2 Keypad models; all X2 models have color displays. These X2 models are the closest versions to the E1000/EXTER panels. X2 pro models have more memory and faster processors than the X2 base units. iX Developer can import an E-Designer or Information Designer project to run on X2 models, though it may not import 100% of the functionality.

5 Adapter plates enable a smaller footprint EXTER or E1000 HMI to fit in the space occupied by a slightly larger, discontinued Exxx or CIMREX model. Note: Adapter Plates allow most E1000/EXTER models to fit the cut-outs used by the discontinued E-series/CIMREX models.

6 X2 series are Beijer main iX models. See the EOL Notifications for details.

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909 (current)

Firmware image for X2 pro, X2 marine and BoX2 pro.

X2 Preemptive maintenance

29.10.2020
IX \ x2 terminals

This message:
" The unit should be scheduled for preemptive maintenance service "
appears on the screen after reboot.

This is a feature implemented in Firmware version 8.0 b569.
It promts that the display or flashmemory is soon to be due (liftime reached)

From Release notes one can read::
Added support of Product health and Service time internal when eMMC flash memory and Backlight reaching end of lifetime.
Presented in Diagnostic Page and in a warning Message:
“The unit should be scheduled for preemptive maintenance service”

If one press ok, the message is gone until new reboot.

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

Some versions of the system program to X2 require the EBOOT to be updated as well. The EBOOT is included when you create "Recovery SD" from the Image Loader. Please note that the SD card must be formatted to FAT16/FAT32 otherwise the EBOOT will not be updated even though the "Make Recovery SD Card" setting was enabled.
The file system exFAT is not supported when upgrading the EBOOT.

The EBOOT version can be verified in the diagnostics which can be opened from the service menu.

X2 pro (SC) / X2 marine (SC) / X2 extreme (SC) / BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Battery replacement

17.oct.2018

General
X2 series operator terminals use Lithium batterys to retain RTC data(Real Time Clock), and Persistent variables (battery backed variables), in terminals with onboard codesys PLC (control \ motion versions) (stored in SRAM)

X2 Base:
use a rechargable Lithium ion 200mA cell. (on print soldered)
Normaly not to be replaced. (need 48h to fully charge on startup)

X2 Extreme:
X2 extreme 7 & ( 12 V)
BR2330A/GAN 3V 255mAh Non rechargable Button cell, Not user Replacable (soldered on print)

All other extreme terminals use:
BR2477A/GAN 3V 1000mAh Non rechargable Button cell, Not user Replacable (soldered on print)

X2 Pro/Marine/control/ Motion:
BR2032 3V 200mAh Button Cell, non rechargable battery. User Replacable.
(remove backcover by unscrew the 4 torq screws ( T10) in each corner)

Lifetime:
The RTC current consumption is 3uA when power is off
The SRAM current consumption is 1-2uA when power is off

Lifetime depends on both temperature, and how much of the time the terminal is powered.

A Standard X2 terminal with no SRAM (only RTC), charging 3uA when power is off should then last 200 000uAh : (3uA*24*365) = 7,6 years. (if never powered) (worst case is estimated to be = 5Years)

A Control terminal with SRAM the calculation would be:
200 000uAh : (5uA*24*365) = 4,6 years. (if never powered)

A standard terminal used 260 days\year 10h\day would last aprox 11 years.
200 000 : ((260days * 14hurs * 3uA) + (105days * 24hours * 3uA))

Warning:
When the Battery is due for replacement, a system warning dialogue will appear in the middle of the screen. This dialogue must be acknowledged to make it disapear. After a reboot the warning will occure again if the low battery condition remains.

Some Details on lithium batterys
BR2032 brakes up to:
B - Positive electrode material (Carbon Monofluoride)
R - Round (shape)
20 - Diameter in mm
32 - Height in 1\10 mm = 3,2 mm

BR2032 vs CR2032:
Due to the differens in positive electrode material, BR cells self discharge slower than CR cells, (thus has longer "shelf time" (90% after 10 years)), And has wider temp. range than CR (-30 to +85 vs -20 to 70).
The voltage is tough the same (3V), and apart from the temp. spec. theese cells are compatible.

Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF, MAEN361

General information of image update procedure, service warnings and how to reduce flash wear on the HMI by storing data on SD cards

For more information: Best Practice Database on SD card or flash memory

MAEN361.pdf

X2 control/pro CAN bus limitations (HW rev. 1)

For utilization of CANopen or FreeCAN on X2 control, we recommend not to operate above 500 kBit/s, on point-to-point connections. For CAN bus network connections, with mutliple nodes, it is recommended to not run above 125 kBit/s.

In the current hardware revision, rev. 1, of X2 pro/control, the input filter on the COM connector has a high load capacitance. This may impact on termination, reflections and bit times, especially at high bit rates.

The high load capacitance will be corrected in hardware revision 2.

Viewing angle X2 series

Beijer	Viewing angle horizonal typ.	Viewing angle vertical typ.
X2 base 5 v2	70/70	50/70
X2 base 7 v2 (HP)	80/80	60/70
X2 base 10 v2 (HP)	75/75	60/60
X2 base 15 v2 (HP)	80/80	80/80
X2 pro 4	80/80	80/80
X2pro7	70/70	60/70
X2pro10	80/80	60/80
X2pro12	80/80	65/80
X2pro15	80/80	70/70
X2pro21	89/89	89/89
X2marine7	70/70	60/60
X2marine7 HB	70/70	60/60
X2marine15	80/80	70/70
X2extreme 7	70/70	60/60
X2extreme 7 HP	70/70	60/60
X2 extrem 7 SL HP	70/70	60/60
X2extreme 12	89/89	89/89
X2extreme 12 HP	89/89	89/89
X2 extreme 12 SL HP	89/89	89/89
X2extreme 15	80/80	70/70
X2extreme 15 HP	80/80	70/70
X2 extreme 15 SL HP	80/80	70/70

MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

MTBF Summary X2 pro, X2 control, X2 motion, X2 marine.pdf

X2 export control and dual use

X2 Export Control and Dual Use_B2.pdf

X2 Letter of Volatility

X2 base, X2 pro, X2 marine, X2 control, X2 motion

X2_letter of volatility .pdf

Battery test summary - X2 pro, X2 control, X2 marine

Battery Test Summary BR2032.pdf

X2 pro image 1.0 b325 Release Notes

X2 image pro 1.0 b325 Release Notesv

X2 ReleaseNotes PIEN344.pdf

Release notes PIEN344D / Last minute notes PIEN345D

Release notes for software image X2 v1.4 B581 (June 2018).

Supporting all model types of X2 pro / X2 marine / X2 control.

Click here to download the Image V1.4 b581.

Note! This image is obsolete, use latest version.

X2 image 1.0 b325 Last Minute Notes

X2 LastMinuteNotes PIEN345.pdf

iX Developer SP7 - 2.47.473 Reference Manual

Reference manuals in different language versions

User guide iX Developer SP7, MAxx832 rev. I

User guide in different language versions

Installation Manual X2 pro, X2 marine, X2 control MAxx202

Installation Manual X2 pro, X2 marine, X2 control

Chinese Simplified
Chinese Traditional
English
French
German
Italian
Portuguese Brazil
Spanish

X2 base / pro / extreme / marine / control - Configuration and Image manual MAEN205 rev G

MAEN205G: describes the X2 series system program.

– iX TxA

– iX TxB

– X2 base

– X2 pro

– X2 control 7

– X2 motion 7

– X2 marine

– X2 marine SC

– X2 marine HB

– X2 marine HB SC

– X2 pro, X2 control

– All X2 extreme

MAEN205G.pdf

Installation manual for X2 pro 4 - B2, MAEN350 English

X2_pro_4_-_B2_MAEN350_English.pdf

AdAuth - iX user authentication with LDAP in domain / Active Directory

iX user authentication with LDAP in domain / Active Directory (AD)

To use LDAP in any iX panel (X2/TxA/TxB etc), the following solution can be used. The AdAuth application is a lightweight PC application created in Visual Studio, acting as TCP server and LDAP client.
For details contact support @beijer.se.

Install in e.g. C:\Users\Public\AdAuth to avoid access right issues!

--- This section is only for PC target (iX PC Runtime): ---
For PC target (iX PC Runtime), it's not necessary to use AdAuth to utilize AD login. See below details for the demo project iX_ActiveDirectory_demo.zip that works only for PC target (iX PC Runtime):

--- iX_ActiveDirectory_demo.zip : ---
The file iX_ActiveDirectory_demo.zip contains an example of LDAP login for TxC and PC target only, for reference ).

--- Background: ---
Sometimes a customer would like user authentication using Active Directory (the domain controller).
This is an iX demo project for PC using LDAP (Lightweight Directory Access Protocol) to authenticate the user.
The script checks what groups the user belongs to in the domain and gives control to iX Security groups depending on this.
iX will actually show the domain user in the SystemTagCurrentUser and in e.g. Audit Trail.

This example does however not contain the functionality for changing the password from within the iX application.

This solution does only work for PC projects (incl TxC etc).

--- Test run the demo project: ---
The attached demo project is ready to run.
If your password characters are shown, add the font password.ttf (found in the Project Files subfolder) to your system!

--- Use this in your own application: ---
To use this in your own iX project, you have to do the following:
Add a reference to the assembly System.DirectoryServices.dll
Import the script module scmLdapAuthentication included in the demo project.
Add a single user (in demo project 'User' with password = 'Password'
Add the specific Security groups that you need to use in your project. These may be the same as the domain groups or may be mapped in the script later (see 'ADJUST HERE' in LoginScreen script).
In the demo project, the groups 'Administrators' and 'Operators' are used.
In Security|General:
Select action on access denied: either 'None' or 'Show Access Denied Message'
Automatic logout: Specify a time.
Import the LoginScreen from the demo project. Adjust the script according to your needs.
Enable Audit Trail (if required).

SqlProxy - Connects iX Panels transparently to SQL Server ( proxy )

There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.

Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Remote Access Viewer is a program for remote access and control Exter/E1000 - TxA/TxB/TAxx - X2 panels.

It is possible to access, reflect and control panels from a PC by using the VNC client program, Remote Access Viewer (freeware), together with the built-in VNC server (Remote Access function) in the iX Panels.

NB: Even though the help file suggests another key combination, please note that Ctrl-Alt-Shift-F toggles Full screen mode on / off best, so you Restore from Fullscreen mode with this key combination! vncviewer.exe_patch.zip contains a patched vncviewer.exe

Melsec Q Profibus DB development kit

This package contains:

MELSEC_Q_Profibus_DP_V0_Pre2.mpd

Description file of the new profibus driver

MELSEC_Q_Profibus_DP_V0_Pre2.cab

The new Melsec Q profibus driver 4.00.05

MelsecQ_PB_X2control10_Demo.zip:

An iX Developer 2.40 demo project

DP_IO32_1.zip:

Mitsubishi GX IEC Developer 7.04 project, I/O area size=32, supporting slave 3 and 4

GXConfig_Melsec_DP_IO32_3_4.dp2:

Melssoft GX Configurator-DP 7.12N project, I/O area size=32, supporting slave 3 and 4

BE09DA.GSD:

The profibus GSD file corresponding to the CiX-DP module

Beijer X2 series panels need a CiX-DP module to enable the profibus communication.

DoC ECCN for X2 series HMI

Declaration of conformity ECCN X2 2021-04-30.pdf

SDoC Green Passport

X2 pro, X2 control, X2 motion, X2 marine

SDoC Green Passport X2 pro, X2 control, X2 motion, X2 marine(PROD CERT - 1164496 - 1 - A1) - 1.pdf

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

Environmental Impact Report X2_rev4.pdf

DoC Green Passport Declaration

X2 pro, X2 control, X2 motion, X2 marine

Green Passport Declaration X2(IFS1164495)_C.pdf

DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

DoC CE, EMC, RoHS Declaration of conformity

X2 pro, X2 control, X2 marine, X2 web, Box2 pro

Manufacturer declaration X2 pro control marine web box DOC Z9116-051G.pdf

ABS PDA certification X2 pro, marine, control, motion

X2 pro, marine, control, motion ABS PDA certification

LR Type approval certificate X2 pro, X2 marine, X2 control, X2 motion

X2 LR Type approval certificate C1760002

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

Compass safe distance X2 pro/control/motion/marine

Compass safe distance X2 pro_ control_Motion_marine.pdf

CE Verification X2 pro

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21

Manufacturer declaration: X2 pro marine control UKCA Declaration of Conformity

X2 pro marine control UKCA Declaration of Conformity.pdf

FCC Verification X2 pro

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21

BV Type approval certificate X2 pro, X2 marine, X2 control, X2 motion

X2 pro, marine, control, motion BV Type approval certificate

Certificate number: 47303/B0 BV

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

47303_B0 BV.pdf

RS certification X2 pro, X2 marine, X2 control

TAC_21.10017.262.pdf

CCS Marine Certificate X2 extreme, pro, control, marine

CCS certificate 2022.pdf

KR certification X2 pro, X2 marine, X2 control, X2 motion

Not valid for X2 pro 21

CPH33151-AC002_20220203_134955.PDF

NKK certificate X2 pro, X2 marine, X2 control, X2 motion

NKK certificate X2 pro, X2 marine, X2 control, X2 motion No.TA17170M (PROD CERT - 1231856 - 1 - A1) - 1

X2 pro, X2 marine, X2 control, X2 motion
NOTE! not valid for X2 pro 21

NKK certificate X2 pro, marine, control 2022 (PROD CERT - 1856405 - 1 - A1) - 1.pdf

DNV certification X2 pro, X2 marine, X2 control

Not available for X2 pro 21

TAA00000N8-revision1.pdf

KCC, MSIP Certificate, X2 pro 4

KCC, MSIP Certificate, X2 pro 4.pdf

ABS Type certification X2 pro, X2 marine, X2 control

X2 ABS Type approval certificate 16-SQ1516745-PDA

X2 pro, X2 marine, X2 control

NOTE! not valid for X2 pro 21

X2 Date time picker script

02.02.2023
X2 series.

This sample project let the user select a date and time from a calendar type of object and stores\presents the selected date/time in various formats in Global tags.

X2_DateTimepicker.zip

IX alarm info request lookup in pdf by page index

31.08.2021
IX developer 2.40 SP6
Demo driver

Consept:
This sample project uses An alarms uniq ID to produce an index.
This index is used to show aditional info from a PDF document, regarding the selected alarm, when the user click the Info button.

Details:
The Main script is in the alarmserver, and fires with the "AlarmServer_AlarmEventInfoRequested" event.

The index is made from the the alarm name column (first column in the alarm configurator that normally has no function for us ), which has default values: AlarmItem0, AlarmItem1 etc.

The script extract the number part 0,1,2 etc to a global tag, to be used as a page index in the PDF viewer object. Finally the Popup screen is opened.

In the popup screen The Pdf is opened, using the Alarm Taxt as Title, and the page corresponding to the index is shown.

PS.
If several alarm groups are in use, Each group will default start with the name AlarmItem0. This will make duplicates. So in this case you must manually verify that the number part in the names are uniq, and consistent.

AlarmInfoIndexing.zip

Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.

This is to be found in Smart Engineering, SER0050. Either download the manual further down for SER0050 or the complete Smart Enginnering here.

Example shows how X2 Base7 control/monitor up to 63 BFI-H3 and BFI-P2 in a Modbus TCP network. Functions supported are:

Program example support:

Works only towards BFI Frequency inverters BFI-H3 and BFI-P2
Start and stop
Change Setfrequency
Normal-, fast- or coasting-stop
Inverter Alarm Reset
Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
Read and Write of all parameters and data available in the inverter
Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
Trend

HMI project created in iX Developer 2.40 SP6.

SER0050_QS_ iX to BFI-H3-P2 ModBusTCP_V1.0.0-EN.pdf

Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.

This is to be found in Smart Engineering, SER0051. Either download the manual further down for SER0051 or the complete Smart Enginnering here.

Example shows how X2 Base7 control/monitor up to 63 BFI-E3, BFI-H3 or BFI-P2 in a Modbus RTU network. Functions supported are:

Program example support:

Works only towards BFI Frequency inverters BFI-E3, BFI-H3 or BFI-P2
Start and stop
Change Setfrequency
Normal-, fast- or coasting-stop
Inverter Alarm Reset
Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
Read and Write of all parameters and data available in the inverter
Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
Trend

HMI project created in iX Developer 2.40 SP6.

SER0051_QS_ iX to BFI ModBusRTU_V1.0.0-EN.pdf

IX X2 Backlight \ screensaver ON Event

14.04.2020
Attached project (X2 Control 10) , Have a scriptmodul that Counts up Tag1 each time the backlight goes from OFF to ON

BacklightStatus.zip

iX Templates for E-key and X-Key

Templates for E-key and X-key, created as popups.

Unzip the *.zip file in < C:\Users\Public\Documents\Beijer Electronics AB\iX Developer 2.40 SP4\Screen Templates > and the templates will be available under “Add Screen”>Templates

Connect an action to the buttons, LED-colourfärg/Led-blink as dynamic if used.

X2 update time from Unix timestamp

24.04.2023
IX 2.40 SP7 \ made for X2 control10

Sample project that reads the system time, convert to unix timestamp format (sec. since 1.1.1970), an store in a global tag.

Then a reverse methode, that takes this global tag and, convert it to time format, and update the system time on the terminal. :)

Unixtimestamptest.zip

Add Tags to Tagmonitor by script

25.03.2019
IX dev. 2.40SP1
X2 control 10 (Should work on all platforms)

Attached sample project adds predefined tags to the TagMonitor object, making it easy to switch between several different sets of tags in the list

TagMonitor.zip

Quick start guide - Connect X2 HMI with Nexto PLC, SUEN00414

How to connect any X2 HMI with Nexto Xpress/modular PLC using Codesys ARTI or

OPC UA

Connect X2 with Nexto SUEN00414.pdf

Ping from IX x2 terminal

27.02.02
IX dev. 2.40 SP4

The attached project sample (X2 control 10), Pings a fixt IP adress every 30 sec, and set\rst a global tag accordingly, to show the status of the connection.
All code is in a scriptmodule, initiated by the "created" event.

The actual Ping syntax is: (returns true\false)
if(Core.Api.Service.ServiceContainerCF.GetService<Neo.ApplicationFramework.Interfaces.INetworkService>().Ping("10.0.0.1", 100))

Ping.zip

iX Developer - Top10 Alarm list, based on count and/or duration

You easily implement a Top10 Alarm list in iX.

1. Add a DatabaseViewer control to a screen

2. Add the following script to the screen:

void AlarmScreen_Opened(System.Object sender, System.EventArgs e)
{
DatabaseViewer1.IsControlVisible = false; //Optional, to hide manual controls
}

void btnTop10_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY COUNT(*) DESC,[Duration (s)] DESC","Database.db");
}

void btnTop10Duration_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY [Duration (s)] DESC, COUNT(*) DESC","Database.db");
}

Top10_Alarms.zip

Quick Start Guide, MELSEC Qnn QJ71E71 Ethernet to X2 series SUEN405

Communication driver in X2: MC Protocol

MELSEC Qnn QJ71E71 Ethernet - X2 series SUEN00405.pdf

Quick Start Guide, MELSEC iQ-R Ethernet - X2 series SUEN00406

Communication driver X2: MC Protocol

MELSEC iQ-R Ethernet - X2 series SUEN00406.pdf

Quick Start Guide, MELSEC QnUDE Ethernet to X2 series, SUEN00403

Communication driver X2: MC Protocol

SUEN00403 - MELSEC QnUDE Ethernet to X2 series.pdf

Quick Start Guide, MELSEC FX5U/FX5UC Ethernet to X2 series, SUEN00402

SUEN00402 - MELSEC FX5U_FX5UC Ethernet to X2 series.pdf

Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI

6222S1.pdf

CAB108 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

CAB108 Gender changer. 9pin Dsub male/male

CAB108.pdf

CAB105 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between Allen Bradley Micrologix and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

CAB105_3m.pdf

CAB106 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between OMRON Host Link and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

CAB106_3m.pdf

CAB107, 25-pol to 9-pol adapter, Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

CAB107 9pin Dsub to 25pin Dsub, for using EXTER/E1000 422/485 cables on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 0,2 meters.

CAB107.pdf

CAB110 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB110 Cable for MELSEC Q Transparent mode for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

CAB110-3m.pdf

CAB109 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

CAB109 Y-split cable to utilize more than two COM ports on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 2 x 0,1 meters.

CAB109.pdf

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug
Used when RS422 point to point communication is used

100-0549

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

3 way splitter cable
Used when 2xRS485 are needed

100-0526

CSS-DWG-1509005 100-0526 CAB150.pdf

CAB104 Cable Drawing forX2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between PC standard RS232 and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

CAB104_3m.pdf

CAB103 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable between MELSEC FX1/2/3-series and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters in drawing CAB103_3m.pdf.

Cable length: 10 meters in drawing CAB103_10m.pdf.

Cable length: 15 meters in drawing CAB103_15.pdf.

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

CAB101_3m.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

CAB100_3m.pdf

3D drawing, X2 pro 4, X2 control 4, X2 motion 4 in STEP format

X2 pro 4, X2 control 4, X2 motion 4, 3D drawing.STEP

Outline drawing, X2 pro 4, X2 control 4, X2 motion 4

Cutout drawing, X2 pro 4, X2 control 4, X2 motion 4

X2 pro 4, X2 control 4, X2 motion 4, Cutout drawing.PDF

Guidelines for TxA and TxB migration to X2.

iX and Allen-Bradley Ethernet CLX

Allen-Bradley ControlLogix and CompactLogix

The E and E1000 series has a driver named Allen-Bradley Ethernet CLX.
This driver is not available in iX Developer. However, that is just the name.
The E1000 variant is actually a limited Ethernet/IP driver, so when converting an E1000 project to iX platform, one can use the Allen-Bradley Ethernet/IP driver instead. This driver also suports newer systems such as the Micro 800, 820 and 850 controllers.

EDS file for CiX-CAN and X2

2-PORT CiX-CAN communication module for TxA, TxB, TxAM, TxC, X2 pro, X2 marine, X2 extreme, QTERM-A7 and QTERM-A12,

2 x 9-PIN D-SUB-Connectors, 5 communication LED:s,

CE, DNV and UL certified, 100-0193

EDS_CiX-CAN.zip includes EDS files for the CiX-CAN module:

CiXCANopen.eds General EDS file

CiXCANopen_Default_PDO1.eds EDS file corresponding to Default Slave PDO setting 1

CiXCANopen_Default_PDO2.eds EDS file corresponding to Default Slave PDO setting 2

CiXCANopen_Default_PDO3.eds EDS file corresponding to Default Slave PDO setting 3

CiXCANopen_Default_PDO4.eds EDS file corresponding to Default Slave PDO setting 4

EDS_X2.zip includes EDS files for the internal CAN on X2 (extreme) panels:

X2CANopen.eds General EDS file

X2CANopen_Default_PDO1.eds EDS file corresponding to Default Slave PDO setting 1

X2CANopen_Default_PDO2.eds EDS file corresponding to Default Slave PDO setting 2

X2CANopen_Default_PDO3.eds EDS file corresponding to Default Slave PDO setting 3

X2CANopen_Default_PDO4.eds EDS file corresponding to Default Slave PDO setting 4

GSD files for CiX-DP Profibus module

1-PORT CiX-DP Profibus DP/MPI slave, option for TxA, TxB, TxAM, TxC, X2 pro, X2 marine, X2 extreme, 9-PIN D-SUB-Conector, CE CERTIFIED, 100-0372

X2 series (German)

36-page brochure incl. general and product family descriptions, technical data, iX and WARP software descriptions, migration paths, etc.

BRDE631E - X2 brochure_2019_15aug.pdf

X2 brochure (Spanish)

BRES631A- X2 brohure_low.pdf

X2 brochure (French)

BRFR631E - X2 brochure_2019_15aug.pdf

X2 brochure (English), BREN631

36 page brochure incl. general and product family descriptions, technical data, iX and acirr+ software descriptions, migration paths, etc. Incl. X2 extreme, X2 pro21 and two-year warranty

BREN631F - X2 brochure_210309.pdf

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909 (current)

Unfortunately, this Sharepoint/HelpOnline entry is broken. Use this one instead:

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909 (current)
https://www.beijerelectronics.com/en/support/Help___online?code=C8EE4A0E-1744-4454-BAB8-23B0F80400A4

Firmware image for X2 pro, X2 marine and BoX2 pro.

X2 LastMinuteNotes X2 pro 2.1 HF.pdf

X2 ReleaseNotes X2 pro 2.1 HF.pdf

X2ImageLoader_build909.exe

X2 pro - X2 control - Image V1.3b569 (Obsolete)

X2 image v1.3 Build569

Support of new X2 pro 7 – 2eth model, improvements and bug correction.
Supports model types: X2 pro 4, X2 pro 7, X2 pro 7 – 2eth, X2 pro 10, X2pro 12, X2 pro 15, X2 pro 21, X2 marine 7, X2 marine 15. X2 control 4, X2 control 7, X2 control 10, X2 control 12, X2 control 15. X2 marine 7 SC, X2 marine 7 HB SC, X2 marine 15 SC, X2 marine 15 HB SC.

NOTE! Update of Image requires update of related EBOOT Build 569 as well.
Update EBOOT via “Make Recovery SD Card”, see “Beijer Panel Image manual" (MAEN205x) for information.
- The EBOOT is included when you create "Recovery SD" from the Image Loader.

X2 pro / X2 marine / X2 control - Image V1.4 b581 (Obsolete)

Firmware/image version 1.4 build 581 to X2 pro / X2 marine / X2 control

Click here to download Release notes PIEN344D / Last minute notes PIEN345D.

X2ImageLoader_build581.zip

X2 image 1.0 b325

Released Version

Description

X2 pro, X2 marine 1.0 B325

September 2016
Initial release of the X2 pro and X2 marine panel platform.

Supports model types:

X2 pro 4, X2 pro 7, X2 pro 12, X2 pro 15, X2 pro 21.

X2 marine; X2 marine 7, X2 marine 15.

X2 image 1.0 b325.zip

X2 image 1.1 b448 release

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21.
X2 marine 7, X2 marine 15.

X2 pro / X2 marine / BoX2 pro, image V2.0 b773 (Obsolete)

Image loader for upgrading X2 pro, X2 marine and BoX2 pro devices to version 2.0. See attached Release notes as well as Last minute notes.

Latest verion is found here:
X2 pro series 2.1 b894 (Current)
https://www.beijerelectronics.com/en/support/Help___online?code=4ABA7F9F-7DCB-4A57-AFDF-1FC752EE50DA
Firmware image for X2 pro, X2 marine and BoX2 pro.

X2 pro / X2 marine / BoX2 pro image V1.5 (Obsolete)

Official release of version 1.5 b686

X2 LastMinuteNotes PIEN345E.pdf

X2 ReleaseNotes PIEN344E.pdf

X2ImageLoader_build686.exe

Part number	630000105
Life cycle status	Active
Warranty	2 year

Mechanical size	145 x 104 x 50mm
Mounting option	Panel Mount, VESA 50 x 50
Number of touches	1million finger touch operations
Touch type	Resistive
Cut-out size	130 x 89mm
Weight	0.5 kg
Housing material	Powder-coated aluminum, Gray

Input voltage	24 V DC (18 to 32 VDC)CE: The power supply must conformwith the requirements according to IEC 60950 and IEC 61558-2-4.UL and cUL: The power supplymust conformwith the requirements for class II power supplies.
Power consumption (max)	12W
Input fuse	Internal DC fuse

CPU	i.MX6Solo Single Cortex-A9 1.0GHz 512kBL2cache
RAM	512 MB
FLASH	2GB SSD(eMMC), 1.5GB free for application

Size diagonal	4.3″ diagonal
Resolution	480x272 pixels
Backlight	LED Backlight
Backlight life time	50000 hours
Backlight brightness	300 cd/m2
Backlight dimming	Industrial Dimming
Display type	TFT-LCD with LED backlight

General	CE, FCC, KCC
Marine	KR, LR, ABS, BV, CCS, NK, DNV GL, RS
Safety	UL 61010-1, UL 61010-2-201, CAN/CSA-C22.2 No. 61010-1, CAN/CSA-C22.2 No. 61010-2-201

Number of serial ports	1 Port 9pin DSUB
Serial port 1	RS 232 (RTS/CTS)
Serial port 2	RS422/485
Serial port 3	RS485 (only if COM 2 is RS485)

Number of Ethernet ports	1
Ethernet port 1	1x10/100 Base-T (shielded RJ45)

Expansion port	Yes, ciX expansion module
SD card	SD and SDHC
USB	1xUSB 2.0 500mA

Registration

Registration

You'll get more

New user?

Log in

Products

HMI panels

4'' HMI with iX runtime

Facts

General description

Certifications

Mechanical

Power

System

Display

Serial communication

Ethernet communication

Expansion interface

Environmental

Drivers

Smart Engineering Resources

Resources

Knowledge

Manuals

Certificates

Drawings

Drivers

Brochures

Product information

Software

Program examples/Start-up

Information document

Configuration files

System program

IX otf and ttf fonts

iX Developer SP7 - 2.47.473 Release information

Driver MODICON Modbus Slave: Command XDNCW

Windows CE versions, X2, iX, E1000

Creating a custom Welcome Screen \ startup screen on a X2 pro operator panel

Google Gmail end suport for " less secure apps " ends may 30 2022

iX - SMTP - Using Gmail servers using App password

Create and use App Password

When are Data deleted from the ix x2 database / backup restore database

OPC ua settings in Phoenix plxnext engineer

Image Sticking

Best Practice Database on SD card or flash memory

Driver Allen Bradley DF1: Behövs 1747-KE kommunikationsmodul ?

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

Max number of recipe items / tags

Convert from Exter/E1000 To X2 Series

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909 (current)

X2 Preemptive maintenance

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

X2 pro (SC) / X2 marine (SC) / X2 extreme (SC) / BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Battery replacement

Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF, MAEN361

X2 control/pro CAN bus limitations (HW rev. 1)

Viewing angle X2 series

​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

X2 export control and dual use

X2 Letter of Volatility

Battery test summary - X2 pro, X2 control, X2 marine

X2 pro image 1.0 b325 Release Notes

Release notes PIEN344D / Last minute notes PIEN345D

X2 image 1.0 b325 Last Minute Notes

iX Developer SP7 - 2.47.473 Reference Manual

User guide iX Developer SP7, MAxx832 rev. I

​​Installation Manual X2 pro, X2 marine, X2 control MAxx202

X2 base / pro / extreme / marine / control - Configuration and Image manual MAEN205 rev G

Installation manual for X2 pro 4 - B2, MAEN350 English

AdAuth - iX user authentication with LDAP in domain / Active Directory

SqlProxy - Connects iX Panels transparently to SQL Server ( proxy )

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Melsec Q Profibus DB development kit

DoC ECCN for X2 series HMI

​SDoC Green Passport

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

DoC Green Passport Declaration

​​DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

ABS PDA certification X2 pro, marine, control, motion

MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

Installation Manual X2 pro, X2 marine, X2 control MAxx202

SDoC Green Passport

DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

CE Verification X2 pro

FCC Verification X2 pro

BV Type approval certificate X2 pro, X2 marine, X2 control, X2 motion

RS certification X2 pro, X2 marine, X2 control

CCS Marine Certificate X2 extreme, pro, control, marine

KR certification X2 pro, X2 marine, X2 control, X2 motion

DNV certification X2 pro, X2 marine, X2 control

3D drawing, X2 pro 4, X2 control 4, X2 motion 4 in STEP format

Outline drawing, X2 pro 4, X2 control 4, X2 motion 4

Cutout drawing, X2 pro 4, X2 control 4, X2 motion 4

Guidelines for TxA and TxB migration to X2.

X2 brochure (Spanish)