M series, M9372 PIO - Firmware update

• M9372_Beijer_Rev2007_bin_20230111.zip
• Release Notes for PIO (V2).pdf
• Update firmware of Beijer Programmable IO (Rev.3).pdf

M-Series Programmable IO - Device Description (XML)

• Programmable IO M9371, M9372 and M9373
  
• Programmable IO ML9971, ML9971 and ML9973 (Not released)
  
• M-series IO modules
  

• PIO XML(V3) for PIO F/W Rev 3.xxx with CODESYS SP17 P3 (build 3.5.17.3)
• PIO XML(V2) for PIO F/W Rev 2.xxx with CODESYS SP11 P3 (build 3.5.11.3)

• 2024.06.03: M-PIO XML(V3): PIO and IO XML (recommended)
  
• 2023.09.05: M-PIO XML(V3): PIO and IO XML
• 2023.01.11: M-PIO XML(V3): Minor updates
• 2022.10.07: M-PIO XML(V3): CODESYS V3.5 SP17 Patch 3 (build 3.5.17.30)
• 2022.05.17: M-PIO XML(V2): Minor update of M7001.devdesc.xml 
• 2022.04.25: M-PIO XML(V2): First version, CODESYS V3.5 SP11 Patch 3 
  
  

• Beijer M PIO XML(V2)_2022.05.17.zip
• Beijer M PIO XML(V3)_2023.01.11.zip
• Beijer M PIO XML(V3)_2023.09.05.zip
• Beijer M PIO XML(V3)_2024.06.03.zip

M937x PIO and Non-volatile memory adjustments! (Retain)

Note! From firmware FW rev 3.002 update (20230111) the non-volatile memory of M9372 and M9373 is changed from 32 to 12KB of which Retain and Persistent Retain memory has been changed from 16 to 6KB each. 

Online change with Update boot application will delay scantime

​See attached PDF file.

• WARNING! PIO will delay online change procedure (Rev 1.1).pdf

CODESYS Trace feature for PIO modules

The 'Trace' function is only supported in the PIO modells that inlcude the visualization. 

That include PIO models: GN-9xx3 (for example GN-9373) and GL-9973/75, GL-9981-C-x, M9xx3 and ML9973/75 series. 

Ethernet port specification of G- / M-series PIO and Network adapters

• Ethernet port specification of the G- and M-series.pdf

Always add a power module (M7001/7002) after the network adapter

​The configuration of M-series network adapters and M-PIO always require to add a power module (M7001/7002) directly after the network adapter, then add the rest of the IO modules.

Note! The same configuration need to be made in the programming tool like example from CODESYS / BCS Tools. See attached file.

For example M9372+M7001+M12DF+M226F  

• Always add a power module after the network adapter (M-series).pdf

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

Programmable IO - Release Notes / Revision history

​See attached documents showing revision history of V1.xxx - V2.xxx, and V3.xxx.

The CODESYS RT versions for each firmware revision are the following:

• PIO FW 3.xxx - CODESYS V3.5 SP17 Patch 3
  
• PIO FW 2.xxx - CODESYS V3.5 SP11 Patch 3
• PIO FW 1.xxx - CODESYS V3.5 SP11 Patch 3

• Release Notes for PIO Beijer(V1-V2)_Rev2007.pdf
• Release Notes for PIO Beijer(V3)_Rev3006 (2024-03-29).pdf

Common noise filter NBH-06-432-D to FnIO S- and M-series (for DNV certificate)

To fullfil DNV certificate standard, the common noise filter 'NBH-06-432-D' from Cosel need to installed between the power supply and the remote IO. The purpose of this is to suppress conductive emission of FnIO Series. If you use other noise filters, our DNV certificate will be ineffective. See attached datasheet of the specification of the filter and example how to connect this noise filter to the FnIO S-series, principle is the same for M-series.

DNV Approval FnIO S-series 
DNV Approval FnIO M-series

• Data_SFE_NBH.pdf
• Install_NBH-06-432D.jpg

FnIO M-, G- and S-series Serial number and Production date

​The serieal number of S-series is 11 digits, G- and M-series is based on 12 digits.
Note, for G- and M-series the last four digits xxxx.

Shock resistance of G- and M-series (IEC 60068-2-27)

According to IEC 60068-2-27 (shock operating) standard the general shock resistance is 15G for all G- and M-series modules.

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-E3

This program example can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0020.  Either download the manual below or the complete Smart Enginnering here.

Program examples are intended for a Nexto PLC NX-30xxx or XP3xx, X2-control/Marine/Extreme or PIO communicating by Modbus TCP with 2 pieces of BFI-E3 Version of Library file for BFICanOpen functionblock is 1.0.0.1.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3-xxx-MTP
  
• Activate/Deactivate communication
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

One PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3

​This program examples can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0014. Either download the manual below or the complete Smart Enginnering here.

PLC-program example is intended for a Nexto, X2-control/Marine/Extreme or PIO PLC communicating by Modbus TCP with 2 pieces of BFI-P2 and BFI-H3. Version of Library file for BFIP2H3ModbusTCP functionblock is 1.0.0.2.

There is also an iX-project supporting all Beijer PLC:s, all communication buses and and all BFI.

Program example support:

• Works only towards BFI Frequency inverters
• Activate/Deactivate communication
  
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

Another PLC-program example is for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

Program example iX Developer: Project for PLC-program generated in BCS Tools or Smart Engineering for PLC communicating with BFI by bus.

​The iX project can be used for Beijer PLC communicating with BFI. It supports PLC-programs generated in BCS Tools 3.62 or Smart enginnering objects SER 0014, 0015, 0017, 0020, 0039, 0040 and 0077. Project created in iX-version 2.50.

PLC can be X2(control/Marine/Extreme), Nexto Xpress, Nexto Modular or PIO.

Buses can be one of or a mix of EtherCat, Modbus TCP, Modbus RTU, CANopen, Profinet, EtherNet IP.

Frequency inverters can be BFI-E3, BFI-P2 or BFI-H3.

• iX_BFIAllbusesV105.zip

Program example BCS Tools and iX: Modbus RTU communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

PIO Firmware Update Tool (for G- and M-series)

• PIO Firmware Update Tool(1.0.0.3).zip
• Update firmware of Beijer Programmable IO (Rev.3).pdf

CODESYS V3.5 SP11 Patch 3, required for G- and M-series PIOs FW rev 2.xxx

​This is the officially tested CODESYS version by Beijer Electronics.
It's required for G-series and M-series PIO using CODESYS RT 3.5.11.30

• features-and-improvements-V35SP11-en.pdf
• ReleaseNote-CODESYS-V351130.pdf
• Setup_CODESYSV35SP11Patch3.exe
• Setup_CODESYSV35SP11Patch3_x64.exe

IO Guide Pro 2.0.0.0 beta (20231128), for Beijer G- and M-series

Important information!

• IOGuidePro(Beijer)_2.0.0.0_Beta (20231128) - copy.zip
• readme.txt_IOGuidePro2.0.0.0beta1.pdf

Manual: Solution Modbus RTU communication Nexto PLC/X2control/PIO with BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-E3

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-P2 BFI-H3

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

M937x M-Series Programmable IO (M9371 / M9372 / M9373)

M9371 Programmable I/O light,
PIO with CODESYS, 512 KB program/96 KB data/4 KB Non‐Volatile memory, SD CARD, USB DRIVE, File System, Master & Slave Node (Modbus TCP/RTU), max 63 slices

M9372 Programmable I/O standard,
PIO with CODESYS, 16 MB program/16 MB data/32 KB Non‐Volatile memory, SD CARD, USB DRIVE, File System, OPC DA/UA, Master & Slave Node (Modbus TCP/RTU), max 63 slices

M9373 Programmable I/O Webvisu,
PIO with CODESYS, 16 MB program/16 MB data/32 KB Non‐Volatile memory, SD CARD, USB DRIVE, File System, OPC DA/UA, Master & Slave Node (Modbus TCP/RTU), max 63 slices

• M9371_M9372_M9373 Beijer FnIO M-Series (Rev 1.10).pdf

M-Series Common User Guide & Hotswap functionality

• Beijer M-Series Common User Guide and Hotswap functionality Rev. 2.00.pdf

Remote IO serial Modbus RS485 wiring (RTU)

​How to wire Remote IO RS485 Modbus communication!

Examples with serial communication, pin configuration and wiring between:

• X2 series HMI and X2 pro/extreme/marine (SC) PLC
  to Beijer Remote IO like GL-9073 and GN-9273.
  
• GL-9972 / GL-9973 / GN-9372 / GN-9373 / M9372 / M9373 Programmable IO PLC to GN-9273 / M9273 / GL-9073 Remote IO. 
  
• Nexto Xpress PLC to GL-9073, GN-9273 and M9273 Remote IO.
• Nexto BCS-NX3003 PLC to GL-9073 Remote IO.
• Nexto BCS-NX3004/3005 PLC to GL-9073 Remote IO.
  
• Nexto BCS-NX3008, serial connected to GL-9073 Remote IO.
  
• Nexto BCS-NX3010 / 3020 / 3030 PLC to GL-9073 Remote IO.
  
  

• Remote IO serial communication wiring (Rev 1.01) 20230404.pdf

M-series Drawing, 2D CAD files (Electrical)

​​File extension: *.pdf *.dwg

• M-series 2D Diagram_20230103.zip

M-series Drawing, 3D / 2D CAD files (Mechanical)

​File extension: *.pdf *.dwg *.stp (step)

• M-Series 3D, 2D Sales Drawing_20220608.zip
• M-series 3D,2D CAD File_20230103.zip

Conversion guide for alternative products between S-series remote IO to G- or M-series

​Use this PDF to chose a corresponding product. In some cases there are several alternatives that may need deeper investigating but in general:
- S- and G- (or M-) series modules cannot be mixed since they are mechanically different, however it is perfectly possible to have connect a S-series and G-series network adapter to the same network.
- The G-series is great all-purpose family that will work in most cases although not marine applications.
- The M-series is adapted for demanding applications and environments. It offers hot-swap and redundancy and is has a marine certifications.  

• FnIO Alternative module lists.pdf
• FnIO Alternative module lists.xlsx

UL & cUL Certificate of compliance - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules 

​NRAQ.E496087 - Programmable Controllers
NRAQ7.E496087 - Programmable Controllers Certified for Canada

• E235505-vol1-MLCertificateofCompliance-E496087.pdf
• NRAQ.E496087 - Programmable Controllers _ UL Product iQ.pdf
• NRAQ7.E496087 - Programmable Controllers Certified for Canada _ UL Product iQ.pdf

UL-HAZLOC Certificate of compliance - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules

Certified for Use in Hazardous Locations:
NRAG.E522453 - Programmable Controllers
NRAG7.E522453 - Programmable Controllers Certified for Canada

• E355715-Vol1-20210526 M-series certificate of compliance.pdf
• NRAG.E522453 - Programmable Controllers for Use in Hazardous Locations.pdf
• NRAG7.E522453 - Programmable Controllers for Use in Hazardous Locations Certified for Canada.pdf

DNV GL - Type Approval Certificate (Revision 1) - Beijer M-series

FnIO M-Series Network Adapters and I/O Modules
DNV GL Type Approval Certificate TAA00002Z8-revision1 (​20211208)

Link to knowledge: Common noise filter NBH-06-432-D

• 20211208_TAA00002Z8-revision1.pdf

DNV approval Fnio M-series DNV GL - Type Approval Certificate

TAA00002Z8 Type Approval Certificate (​20210426)

TAA00002WF_3 Type Approval Certificate ( 2024-08-16 ) - VaIid until (2025-11-25.)

• 20210426_TAA00002Z8_Type Approval Certificate.pdf
• TAA00002WF_3.pdf

Beijer M-series certificate overview

​2022.11.17 Latest update of the plans (Rev 1.07)

• Beijer M Series certificate overview (Rev 1.07).pdf

ATEX Zone 2 Certificate - Beijer FnIO M-series

• UL 22 ATEX 2690X Rev. 0.pdf
• US_UL_ExTR22.0008_00_000.pdf

​CE DoC - Beijer M-series including EMC, LVD, RoHS-II & Reach

• CE DOC_M-Series_CE DoC for Beijer M-series products (Rev.1) - Signed (PRODCERT - 2121687 - 1 - A1) - 1.PDF

FCC DoC - Beijer M-series

• FCC DoC for Beijer M-series products - Signed.pdf

Beijer M-series Caution and Warning (ATEX & RoHS) Rev.3.02

• Beijer M-Series Caution and Warnings - ATEX and RoHS (Rev302)_2022-10-17.pdf