BCS Nexto modular/Nexto Xpress - PID advanced library

​

• BCS352_XP325_PID_Adv.projectarchive
• MU214610_advanced_control_functions_-_user_manual.pdf

Manual: Solution Ethernet IP communication Nexto PLC with BFI-P2 BFI-H3

• SER0040_QS_BFIP2H3_EtherNetIP_V1.0.0-EN.pdf

Manual: Solution Profinet communication Nexto PLC with BFI-P2 BFI-H3

• SER0077_QS_BFI_PROFINET_V1.0.0-EN.pdf

BCS Tools - User Manual

Doc. code: MU299609
MU299609 Rev. I 03/2023

• MU299609_rev_I.pdf

BCS Tools - Programming Manual

Doc. code: MP399609
Rev. BE_B 11/2013

• MP399609_BE ver B.pdf

Manual: Solution EtherCAT communication Nexto PLC/X2control with BFI-P2 BFI-H3

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

Manual: Solution Modbus RTU communication Nexto PLC/X2control/PIO with BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

Manual: Solution CanOpen communication Nexto PLC with BFI-P2 BFI-E3

• SER0039_QS_BFI_CANopen_V1.04-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-E3

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-P2 BFI-H3

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

BCS NX940x - User's manual (Connectors of Nexto Series)

​NX9401, NX9402, NX9403 and NX9404 constitute a series of connectors used in Nexto Series of Programmable Controlers

• BCS-NX940x (CE114818).pdf

BCS NX92xx - User's manual (RJ45-RJ45 Cables)

​RJ45-RJ45 Cables

• BCS-NX92XX (CE114800).pdf

BCS Nexto Series - User Manual

• BCS Nexto Series User Manual MU214600 Rev V.pdf

Program example BCS Tools and iX: EtherCAT communication between Nexto PLC/X2control and BFI-P2 BFI-H3

This program examples can be Auto configurated in BCS Tools 3.62. The Auto configuration for EtherCAT is turned ON/OFF in BCS Tools, Tools/Options/Device Configuration.

This program example is also to be found as Smart Engineering object, SER0017. Either download the manual further down for SER0017 or the complete Smart Engineering here. If using this program example make sure that Device Configuration is turned OFF.

Program example is intended for a Nexto, X2-control/Marine/Extreme communicating by EtherCat with 2 pieces of BFI-P2 and BFI-H3.

Version of Library file for BFIEtherCat functionblock is 2.0.0.0.

Program example support:

• Works only towards BFI Frequency inverters
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
  
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status.
• Read and Write of parameters
• Read of Drive type, communication type, Input voltage, Power, Frame size, Firmware and serialnumber 
  

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One iX-project to monitor/control BFI through the PLC. 

Another PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

BCS Tools/Nexto - Modbus TCP and Crevis I/O, init ST-3702

​Program example:
How to init a ST-3702 for Pt1000 (default value are Pt100)

Project1: Node with one ST-3702, “Modbus_ex_Nexto_ST3702_20171004.projectarchive”
Project2: Node with two ST-3702, “Modbus_ex_Nexto_2pcs_ST3702_20171004.projectarchive”

• Modbus_ex_Nexto_2pcs_ST3702_20171004.zip
• Modbus_ex_Nexto_ST3702_20171004.zip
• Nexto_modbus_crevis_init_ST3702.pdf

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3

​This program examples can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0014. Either download the manual below or the complete Smart Enginnering here.

PLC-program example is intended for a Nexto, X2-control/Marine/Extreme or PIO PLC communicating by Modbus TCP with 2 pieces of BFI-P2 and BFI-H3. Version of Library file for BFIP2H3ModbusTCP functionblock is 1.0.0.2.

There is also an iX-project supporting all Beijer PLC:s, all communication buses and and all BFI.

Program example support:

• Works only towards BFI Frequency inverters
• Activate/Deactivate communication
  
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

Another PLC-program example is for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

Program example BCS Tools and iX: Modbus RTU communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

Program example BCS Tools and iX: Ethernet IP communication between Nexto PLC and BFI-P2 BFI-H3

This program examples can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0040. Either download the manual below or the complete Smart Enginnering here.

PLC-program example is intended for a Nexto, XP300 PLC, communicating by EtherNet IP with 2 pieces of BFI-P2 and BFI-H3. Version of Library file for BFIP2H3EtherNetIP functionblock is 1.0.0.0.

There is also an iX-project supporting all Beijer PLC:s, all communication buses and and all BFI.

Program example support:

• Works only towards BFI Frequency inverters
• Activate/Deactivate communication
  
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0040_QS_BFIP2H3_EtherNetIP_V1.0.0-EN.pdf

Program example BCS Tools and iX: Profinet communication between Nexto PLC and BFI-P2 and BFI-H3

​This program example can also be Auto configurated in BCS Tools 3.62. If using this programexample make sure that Device Configuration for Profinet is turned OFF in BCS Tools, Tools/Options/Device Configuration.

This program example is to be found as Smart Engineering, SER0077. Either download the manual further down for SER0077 or the complete Smart Engineering here.

Program example is intended for a Nexto PLC XP300 communicating by Profinet with 2 pieces of BFI-P2 and BFI-H3.

Program example support:

• Works only towards BFI Frequency inverters
  
• Activate/Deactivate communication
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0077_QS_BFI_PROFINET_V1.0.0-EN.pdf

Program example iX Developer: Project for PLC-program generated in BCS Tools or Smart Engineering for PLC communicating with BFI by bus.

​The iX project can be used for Beijer PLC communicating with BFI. It supports PLC-programs generated in BCS Tools 3.62 or Smart enginnering objects SER 0014, 0015, 0017, 0020, 0039, 0040 and 0077. Project created in iX-version 2.50.

PLC can be X2(control/Marine/Extreme), Nexto Xpress, Nexto Modular or PIO.

Buses can be one of or a mix of EtherCat, Modbus TCP, Modbus RTU, CANopen, Profinet, EtherNet IP.

Frequency inverters can be BFI-E3, BFI-P2 or BFI-H3.

• iX_BFIAllbusesV105.zip

Get Started with Nexto Xpress - MQTT communication

• MQTTClient_XP325_BCS330.projectarchive
• Nexto Xpress MQTT communication - SUEN00394.pdf

Get Started with Nexto Xpress - The Basics

​

• HelloWorld_XP325_BCS330.projectarchive
• Nexto Xpress The Basics - SUEN00392.pdf

Get Started with Nexto Xpress - High speed datalogging

​

• Datalogger_XP325_BCS330.projectarchive
• Nexto Xpress High Speed Data Logging - SUEN00395.pdf

BCS Tools, MODBUS Symbol Server/Client

​Example with one Server (NX3020) and one Client (NX3010)
- 3 Register (Holding) to Send
- 3 Register (Holding) to Read
- 1 bit (Coil) to Send
- 1 bit (Coil) to Read

Setup in  Server

Setup in Client

Tags TO / FROM server

Modbus Communication to "IP-address" (To the Server)

• NEXTO_ModbusSymbol_Client_Server_BCSTools_206.zip

Program example BCS Tools and iX: CanOpen communication between Nexto PLC and BFI-P2 BFI-E3

​This program examples can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0039. Either download the manual below or the complete Smart Enginnering here.

Program examples are intended for Nexto PLC NX-30xx or XP3xx communicating by CanOpen with BFI-E3 BFI-P2 . Version of Library file for BFICanOpen functionblock is 1.0.0.0.

Program example support:

• Works only towards BFI Frequency inverters
• Activate/Deactivate communication
  
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

One PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0039_QS_BFI_CANopen_V1.04-EN.pdf

Get started with Nexto Xpress - IEC60870-5-104

​

• IEC60870-5-104 DecodeDBP.compiled-library
• IEC60870-5-104 zenon Scada test for XP340.zip
• IEC60870-5-104_XP340_BCS330.projectarchive
• Nexto Xpress IEC60870-5-104 - SUEN00399.pdf
• Nexto Xpress IEC60870-5-104 - SUNO00399.pdf

Get Started with Nexto Xpress - Database communication

​This document describes how to communicate with Nexto Xpress/Modular and  Microsoft SQL server.

Nexto Xpress and Nexto Modular includes a library, LibSQLClient, to enable the ability to communicate directly with a Microsoft SQL server by using the TDS 4.2 protocol. There is no need for any intermediate software.

Supported database:

• Microsoft SQL with TDS 4.2 protocol
  

Supported commands:

• SELECT
  
• INSERT INTO
• UPDATE
• DELETE FROM
  

• Nexto Xpress Database communication - SUEN00397.pdf
• SQLClient_XP325_BCS330.projectarchive

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-E3

This program example can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0020.  Either download the manual below or the complete Smart Enginnering here.

Program examples are intended for a Nexto PLC NX-30xxx or XP3xx, X2-control/Marine/Extreme or PIO communicating by Modbus TCP with 2 pieces of BFI-E3 Version of Library file for BFICanOpen functionblock is 1.0.0.1.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3-xxx-MTP
  
• Activate/Deactivate communication
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

One PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Program example Px (X2/BoX2 control/Nexto Xpress/Modular - BSD v3.37

​This program example contains everything you need in order to get your X2/BoX2/Nexto control solution with BCS Tools and BSD products up and running using basic servo functionality.

Programming environment needed for this example:
- iX Developer v2.51
- BCS Tools v3.62

The startup example contains:
 - BCS362_Px_v337.projectarchive : BCS Tools project for X2 control 7 (powerfail) and 8 servo axis.
 - BCS362_Px_v337_NX3008.projectarchive : BCS Tools project for BCS-NX3008 and 8 servo axis.

 - iX251_X2_Pro_7_BSD_CSx_Px_v504 : iX project version 5.04 for X2 control 7"

Note!

• iX project iX251_X2_Pro_7_BSD_CSx_Px_v504 must be used in combination with BCS Tools project BCS362_Px_v337.projectarchive due to name changes of variables.
  
• Name change SC -> CSx_Px, CS = Cyclic Synchronous, P = profile mode, x = generic term for either position (P), velocity (V) or torque (T)
  
• Some cosmetic changes
  

• BCS362_BSD_Px_v337.projectarchive
• BCS362_BSD_Px_v337_NX3008.projectarchive
• iX251_X2_Pro_7_BSD_CSx_Px_v504.zip

Beijer Control system: Nexto Series catalog

Take control over your business with Nexto Series programmable controllers

Nexto Series is an advanced automation system capable of controlling, in a distributed and redundant way, complex industrial processes, machines and high performance production lines. Modern and fast, Nexto products are based on cutting edge technology in order to provide trustworthiness and connectivity, contributing to your business productive growth.

• BCS-Nexto modular 2018-05-08 web.pdf

BCS-Nexto/Nexto Xpress - Number of supported ARTI connections

​BCS-NX3010/3020/3030 = 8 ARTI connections (from firmware 1.5.0.10)

BCS-NX3003/3004/3005 = 8 ARTI connections (from firmware 1.7.49.0)

BCS-XP300/315/325/340 = 8 ARTI connections ( from firmware 1.7.46.0)

ARTI connections include iX connection with ARTI driver, BCS Tools connection and Codesys OPC DA server connection.

Clarification about the force function in CODESYS

BCS Tools - The address %QBxxxxx not defined in any device

BCS Tools - OPC DA connection to the CPU or the simulator in BCS Tools.

When installing BCS Tools the OPC server from CoDeSys is installed in the background.

To configure the OPC server to connect to the simulation mode in BCS Tools do the following:
(When connecting to the cpu this step can be ignored)

Set the project to simulation mode

Create the Symbol Configuration object and select the variables to be exposed.

Call the configuration screen for the OPC server.

Use these settings to connect to the simulator in BCS Tools.
Local host addr: 127.0.0.1   
Device Port: 11739

Use these settings to connect to the CPU.
Local host addr: IP address to the cpu
Device Port: 11740

Screenshot of Matrikon OPC Explorer connected to the OPC server in BCS Tools.

Nexto Modular/Nexto Xpress - TLS support

​Nexto Xpress with firmware 1.9.9.0 or later supports TLS 1.0, 1.1 and 1.2.

​Nexto modular NX3003/NX3004/NX3005 with firmware 1.9.8.0 or later supports TLS 1.0, 1.1 and 1.2.

​Nexto modular NX3010/NX3020/NX3030 all firmware versions only supports TLS 1.0.

Nexto modular/Nexto Xpress - MQTT TLS certificate validity check

​At connection handshake when using certificates for TLS there is a validation check against the validity period of the certificate and the actual time set in the RTC.

Very important to make sure that the RTC is set with the current time otherwise the connection establishment will fail if the RTC is outside the validity period of the certificate.

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

BCS Nexto - ARTI/OPC communication

From BCS Tools 2.0 and cpu firmware 1.4.0.33 ARTII/OPC communication is supported.

 - Keep in mind that this only works with the built-in ports and NOT the NX5000.

For example iX panels (TxA/ TxB / TxC) with CODESYS ARTI driver can communicate with BCS-Nexto system.

Example of a Modbus/TCP client via PLC code using the Oscat library

Example of a Modbus/TCP client via PLC code using the Oscat library

In the example Modbus Function Code 3 and 16 (read multiple holding registers and write multiple holding registers) are used to read and write 100 holding registers every 100 ms.

 Example for Nexto (3010 CPU) is created with BCS Tools 2.03

Example for TxB-SoftControl (hardware with firmware 3.5.7.10) is created with CoDeSys 3.5 SP7 Patch 3

• Nexto_ModbusTCP_Client_via_PLC_code.projectarchive
• TxB_SC_ModbusTCP_Client_via_PLC_code.projectarchive

BCS Nexto Xpress/Modular - MQTT version

The current MQTT stack implemented in Nexto Xpress and Nexto Modular supports;
- MQTT v3.1.1
- MQTT v3.1

LTB Life Cycle Notification BCS-NX940x spareparts

• 04--LTB_beijer_electronics_life_cycle_notification--BCS-NX940x--2021-03-03.pdf

BCS Nexto/Nexto Xpress - MQTT certificate support

When using encypted MQTT communication with TLS, communication is established by using X.509 certificates. These certificates can have different encoding schemes where one being the PEM(Base64 ASCII) or DER (binary).

Normally PEM files uses the extension *.crt, *.pem, *.cer and *.key and DER files normally uses *.der or *.cer.

​With the current firmware:
Nexto Xpress XP3xx/Nexto modular NX3008 1.12.24.0
Nexto modular NX300x 1.12.23.0 and
Nexto modular NX30x0 1.10.8.0
in combination with LibMQTT 1.0.0.8 only Base64 ASCII encoded certificates can be used.

DER encoding scheme is no supported.

The manual states using certificated with *.crt extension, it is confirmed that also *.pem works fine as long as the enconding scheme is supported.

More details about encoding schemes and extension can for example be found here:
https://www.ssl.com/guide/pem-der-crt-and-cer-x-509-encodings-and-conversions/#ftoc-heading-2

Nexto I/O update with EtherCat master

The EtherCAT Master for Nexto have 2 "modes" of I/O update:

1) Update all the I/O in one task only (bus cycle task)

2) Update the I/O in the context of each task

The selection of this "mode" is made by the following setting:



When this setting is checked, you are on "mode" 2. Otherwise, "mode" 1. The bus cycle task ("mode" 1) is selected here:



For "mode" 1, by default the bus cycle task is assigned to MainTask, but you can assign to some other task if you want. For example, you can assign it for a TimeInterrupt task. In this case, Nexto I/O modules will be updated on MainTask, and EtherCAT I/O will be updated on TimeInterrupt (preempting the MainTask).

For "mode" 2, the EtherCAT Master will perform the I/O update on the context of each task which uses some EtherCAT I/O on some POU. So, it means that the bus activities can be spread into several tasks.

The local bus I/O also have these two "modes", and you can select it on the CPU configuration window:

Please note that these "modes" are not an official terminology...it is just a way to help on the explanation.

Regarding the REFRESH_INPUT/REFRESH_OUTPUT function, they are very specific and must be used only on MainTask and only for local Nexto I/O modules. If you want I/O update on other task than MainTask, you should use the "update/messages per task" options described above.

Now, finally, lets take a look at the moment that the I/O update is performed on each of these scenarios:

Nexto - Persistent variables loose their value if the name of the application changes

Nexto - Check operating status of I/O modules

​The attached document contains a "best practice" method to monitor the operational state of rack mounted I/O modules. This method is the recommended to use when creating interlock and alarms from the I/O modules.

• NAP15900.pdf

BCS Tools - Edit CSV files with Excel 2013 or newer might destroy and make the csv files unusable for BCS Tools

When editing exported csv files with Excel 2013 or newer Excel might detroy the format of the csv files after saving it.

As a workaround OpenOffice Calc can be used instead of Excel.

https://www.openoffice.org/download/index.html

Download BCS Tools from SmartStore

​To download the current and older versions of BCS Tools please visit Smart Store: https://smartstore.beijerelectronics.com/

Download latest BCS Tools version

BCS Nexto modular - DNV approval

• TAA00001BU_10.pdf

BCS Nexto/Nexto Xpress - UL/cUL certificate

​Please use these links to access the UL/cUL certified Nexto/Nexto Xpress products

UL
https://iq.ulprospector.com/en/profile?e=222921

cUL
https://iq.ulprospector.com/en/profile?e=246429

NOTE!
- BCS Nexto only has UL approval
- An account has to be created (for free) to access the certificates

BCS Nexto Modular - CE EMC/LVD Declaration

• DC414001.pdf

BCS Nexto Modular - UKCA Declaration

• DC414061.pdf

BCS Nexto modular - CAD symbols

NAMING OF FILES
Example: NX3010_20130529.dwg.zip

Where:
NX3010 : product name
20130529 : file date in the format "YYYYMMDD" (in this example: May, 29th 2013)
dwg : file format provided

FILE VERSION:
DWG - Autocad 2002 or higher
STEP - AP214

• NJ1001_20150928.dwg.zip
• NJ1001_20150928.step.zip
• NJ1005_20170714.dwg.zip
• NJ1005_20170714.step.zip
• NJ2001_20150928.dwg.zip
• NJ2001_20150928.step.zip
• NJ6000_20150928.dwg.zip
• NJ6000_20150928.step.zip
• NJ6001_20170714.dwg.zip
• NJ6001_20170714.step.zip
• NJ6005_20170714.dwg.zip
• NJ6005_20170714.step.zip
• NJ6010_20150928.dwg.zip
• NJ6010_20150928.step.zip
• NJ6011_20170714.dwg.zip
• NJ6011_20170714.step.zip
• NJ6020_20150928.dwg.zip
• NJ6020_20150928.step.zip
• NJ6100_20150928.dwg.zip
• NJ6100_20150928.step.zip
• NJ6101_20170714.dwg.zip
• NJ6101_20170714.step.zip
• NX1001_20121204.dwg.zip
• NX1001_20130820.step.zip
• NX1005_20121204.dwg.zip
• NX1005_20130820.step.zip
• NX2001_20121204.dwg.zip
• NX2001_20130820.step.zip
• NX2020_20121204.dwg.zip
• NX2020_20130711.step.zip
• NX3003_20200904.dwg.zip
• NX3004_20150629.dwg.zip
• NX3004_20150629.step.zip
• NX3005_20160901.dwg.zip
• NX3005_20160901.step.zip
• NX3010_20130611.step.zip
• NX3010_20130709.dwg.zip
• NX3020_20130708.step.zip
• NX3020_20130709.dwg.zip
• NX3030_20130708.step.zip
• NX3030_20130709.dwg.zip
• NX4000_20121204.dwg.zip
• NX4000_20130708.step.zip
• NX4010_20121204.dwg.zip
• NX4010_20130711.step.zip
• NX5000_20121204.dwg.zip
• NX5000_20130711.step.zip
• NX5001_20121204.dwg.zip
• NX5001_20130711.step.zip
• NX5110_20160915.dwg.zip
• NX5110_20160915.step.zip
• NX5210_20160915.dwg.zip
• NX5210_20160915.step.zip
• NX6000_20121204.dwg.zip
• NX6000_20130820.step.zip
• NX6010_20130820.dwg.zip
• NX6010_20130820.step.zip
• NX6020_20140331.dwg.zip
• NX6020_20140331.step.zip
• NX6100_20121204.dwg.zip
• NX6100_20130820.step.zip
• NX8000_20130708.step.zip
• NX8000_20130709.dwg.zip
• NX9000_20150629.dwg.zip
• NX9000_20150629.step.zip
• NX9001_20121204.dwg.zip
• NX9001_20130610.step.zip
• NX9002_20130611.dwg.zip
• NX9002_20130611.step.zip
• NX9003_20121204.dwg.zip
• NX9003_20130611.step.zip
• NX9010_20150702.dwg.zip
• NX9010_20150702.step.zip
• NX9102_20130611.step.zip
• NX9102_20130709.dwg.zip
• Readme.txt

BCS Tools/BCS Nexto/BCS Nexto Xpress - Revision history

• RevisionHistoryProductsBEIJER_20240607.pdf

Configuration file Profinet (xml) for BFI-H3 and BFI-P2

Also .bmp included in the package.

• BFIProfinet SW=V2.7, HW=2.zip

BCS Nexto - MiB files for SNMP monitoring

MiB files for SNMP monitor function in Nexto. (BCS-NX3004, BCS-NX3010, BCS-NX3020, BCS-NX3030)

SNMP functionality requires cpu firmware 1.4.0.33 or later.

• BEIJER-NEXTO-NX3004.mib
• BEIJER-NEXTO-NX3010.mib
• BEIJER-NEXTO-NX3020.mib
• BEIJER-NEXTO-NX3030.mib

BCS Nexto - Cpu Firmware 1.8.13.0/1.9.29.0 (transition version)

​BCS-NX3003 / BCS-NX3004 / BCS-NX3005 = 1.9.29.0
BCS-NX3010 / BCS-NX3020 / BCS-NX3030 = 1.8.13.0

Note! New format of firmware update file. This is the transition version.

• Nexto modular v1.8.13.0_v1.9.29.0.zip

BCS Nexto Series - Datasheet

​Nexto Series Programmable Logic Controller
- Complete list of modules

• BCS Nexto Series Datasheet CE114000 Rev V.pdf

BCS-NX90xx - Datasheet

• BCS-NX90xx Datasheet CE114700 Rev M.pdf